D&L 5 Inch Swivel Casters Wheels 1500lbs Heavy Duty Castors with Brake Polyurethane Dual Locking Casters Set of 4 Orange DL-I5-001

I bought these to make my own shop/detailing seat. All of the ones I found available for sale had problems. A high price tag was the number 1 problem. Seat height was next because most of the seats I found were just too high. I shouldn't have to bend over while seated. Then there was small wheel size since I planned on using this in the driveway where the surface is rougher and could have any number of objects dropped from trees or tires. Finally the quality varied dramatically with the price.Fortunately I already had pieces of plastic sheet lumber from another project. I wanted that because it's very durable and water will never be an issue. The seat will primarily be used for detailing. I cut two rectangles. I mounted the wheels to the lower one. I used 2x4s to figure out the height I wanted. They were the perfect size, were treated for exterior use, and would be tucked in so it seemed like a logical solution instead of cutting more plastic pieces. Then the top piece went on and I routed the edges. It's not the prettiest thing I've ever built but this was an exercise of function over form and I know this will get bumped and beaten around the garage. I also put pieces on the bottom to hold the top in place if it was screwed on. I might use this to roll other things around and wanted it to be an easy changeover.Now that I'm done telling you about my project I'll tell you about the wheels. They stunk when I opened the box so I suggest opening it for the first time outside. They are solidly built. The included bolts were the perfect length to attach my sheet. The wheels rotate and spin freely and smoothly. The locks are a little difficult to engage and disengage but they work great. I couldn't have asked for a better set of wheels for my purpose. In my driveway they roll like they are on glass. I have to admit I've ridden my seat down the driveway a couple of times so they are good for recreational uses also. I would definitely recommend these.

I put these on a work bench that I made. They’re way less expensive than the 5-inch casters my local hardware store had in stock. They are also much higher quality.

The media could not be loaded. I bought these casters in mine to replace the original casters on a dog bone creeper. They are just slightly taller and they came with a wheel lock. I had to cut the wheel lock off, which was very simple. They bolted up to be original holes, which made insulation simple. I am an off-road heavy equipment mechanic I’m in dirt and mud often. These casters are performing better than the original equipment on this creeper. I’m very happy with them, not only because I finally found something that could replace my old casters, but because they outperform the original casters.

While I really like these casters, this is the third set of them I have purchased, they come with NO grease in them. Not in the swivel or the wheel bearings. Greasing the swivel is easy enough with a grease needle on the end of my grease gun. However, the wheel bearings are a little more involved to get them greased. First, you’ll need to remove the nut and bolt that holds the wheel to the swivel. Then with a very small thin blade screwdriver you need to pop the metal grease seal out of the bearing it WILL deform only slightly even if you take your time. You need to pry from the inside edge only. Trying to remove it from the outside edge WILL destroy it. They are very thin and fragile, but it can be done. Once the seal has been removed, you can use the same grease needle to add some grease, or just pack some in with our fingers. Once it is packed, very carefully press the seal back in, and reinstall the wheel on the caster.The first two sets that I purchased have not been greased yet, as the dollys that I put them on are only used twice a year, and at the time I did not know they had no grease in them. I will add some when I use the dollys again this spring. I’m not sure how long they would last if you don’t add grease, but now that I have, I expect a much longer life span than without.

Heavy duty. Work great . I bought 2 sets

The media could not be loaded. Very nice set of caster wheels worked great holding up my washer and dryer machine. The price is Great cheaper than Home Depot

I bought two sets of these wheels to build a cart to support our new hot tub. It is 950 lbs and we had to move it about 80 feet to where it was going to be placed. I used plywood as a surface to roll across the yard but with these wheels it moved almost effortlessly. One of the guys helping me kept saying they couldn’t believe how easy it was rolling. These wheels are definitely very sturdy, roll smoothly and worth the money if you need to move something heavy.

I have a project in my garage and always had a hard time moving around with it.I mounted these casters on a frame,then loaded my project on top and now I can move it around in my garage with one hand.

Articolo allineato alle aspettative

Las ruedas son magnificas, esisyentes y bien terminadas, buena calidad de materiales, mejor de lo esperado. Los tornillos que traen, especialmente los de madera no sirven para nada. Ese es el único problema que pueden tener, pero totalmente ajenos a las ruedas en si mismas.

Lovely cheery orange, very well made and even comes with a wrench and screwdriver, well packaged and arrived quickly. Unfortunately I had to return as I had ordered the wrong size. Even the return was an easy smooth transaction.

Stabile Rollen zu einem akzeptablen Preis.Preis/Leistung = Gut

Je m'en suis servi sous des palettes pour les transformer en chariot de jardin, ou pour des charges lourdes, et rien à redire. Elles sont robustes, pratiques, et la fonction frein est un plus lorsque l'on veut que la palette ou tous supportes restent en place