SAPLIZE Cross Cord Golf Grips Set of 13 Grips with Tape or Full Regripping Kit, Std/Mid/Jumbo, Low Taper Design, Multi-compound Hybrid, Anti-Slip Golf Club Grips, CL03 Series

Product came just as described, delivery was delayed one day but that was Amazon issue not vendor issue. Absolutely love the orange color and they look great on my clubs! Very easy to put on and I have never installed my own grips before and I did. Every iron I have plus my wedges and about an hour and a half. The quality is great and feels just like the golf pride grips that I have on a couple of my other clubs!.

Just as good as golf pride grips and half the cost

Summary: - These grips feel very similar to Golf Pride New Decade Grips - They cost less than half as much as Golf Pride New Decade Grips - Installation was the same as any other grip I've ever installed (not harder or easier) - Too early to determine long term quality If you're anything like me, you have a hard time paying 130$ or more for golf grips. This usually means that I'm relegated to a lower end grip. I decided to give these grips a shot when I needed to replace a few grips in my bag. I was hesitant based on some feedback a friend of mine had given me about them being difficult to install, but the cost savings made me willing to give it a shot. The package arrived quickly as usual with Amazon. Grips were all together in a bag with the grip tape, solvent, spray top for the solvent, grip cutting knife and instructions. I did not use the included knife as I already had a utility knife set up with a carpet blade. I used a small vise that I have used in the past mounted to a table to hold the club in place. Other than that, I used only what was provided with the grip kit I got and successfully installed the grips. Installation was straightforward and the same as other grip installations I have done in the past. (See video) Like other grips with paint/ink on them, when the solvent gets on those areas, the color will bleed a bit. This is not a comment on quality as all grips I've ever used react the same way. The grip tape that was included is a sort of clear-ish plastic tape. More than adequate to keep the grips from twisting on the clubs, but I don't know how difficult it will be to remove when I need to re-grip. Only time will tell. In a side by side comparison of to Golf Pride New Decade grips that were on 3 of my clubs, the Sapalize grips are very similar. I have not gotten out to hit them yet, but I don't know that blindly I'd be able to tell the difference. Visually, they are very similar as well. (See photo) Colors are a few shades different and the pattern is slightly different, but you can see where Sapalize got their inspiration from. Overall, I would not hesitate to buy these again at this point. I will update this review should anything change with how they perform on the course.

Background info: have been building my own golf clubs from components for 20+ years and play to a 15 handicap. So...needed new grips for an iron set reshaft and didn't want to break the bank. The currently wonderful economy (sarc) has killed my retirement, so I thought I'd take a chance on these as the price was good and didn't have many bad reviews overall. I used a set of shafts that were pulled from another set of irons I had previously reshafted; these shafts had the Golfpride CP2 Pro grips already on them. Dry fitted the heads-shafts for swingweight and tip-weighted accordingly. THEN I bought these Saplize hybrid grips in midsize (size based on other review comments) to change out the grips. Midsize worked out great! The only problem is these Saplize hybrid midsize grips are on average ~20 grams heavier than the CP2's, and the end result is a 4+ point lighter swingweight. The weight consistency of these grips was good, all within 2 grams, most were 76g, three were 75g, and one was 74g. The grips themselves feel really good; I think these will work out well. I haven't been able to hit the irons yet to see if the lighter swingweight will be an issue or not. If it is, I can always do the good old lead tape fix to adjust a little. Next time, I'll dry fit with the correct components. Some reviewers mentioned colors fading because of solvent. If you get solvent on the outside of a grip DO NOT RUB; just "dab" it off with a cloth and there will be no color fading/running. Also, I used my regular grip tape, not the tape that came with the grips...and plenty of solvent. I had no problems with installation. Overall, I think these will work out fine. They are not as high quality finish-wise as a GP, but they ARE less than half the price and still very playable! Durability is still a question, but at this price I can afford to change them out more often if needed. Overall, I am pleased with the Saplize Hybrid midsize and will probably buy again. If you need grips that are economical and still very playable you should give these try.

This product is perfect. It was delivered in great time and the box was complete with the materials needed to install the grips onto the golf clubs. Very impressive.

These are great and the oversized are perfect for my medium size hand, easy to install and look great.

I don’t know why there was so many negative reviews about them bleeding about having a hard time putting them on too much cordage. I removed old grips and replaced new ones and just one hour. The only reason I can figure that people have a hard time putting them on as they don’t use enough solvent on the glue and on the grip. The only reason I can figure is they bleed is that they get too much of a solvent on the outside of the grip. I got the midsize and even left one layer of the old tape on the shafts and still had no problem putting these grips on with two layers of tape. Definitely will recommend. Update I bought another set of irons and ordered a set of new cord grips and tape. Everything was fine except the tape, why did they change the type of tape this backing is so aggravating trying to get off from the tape while it is on the shaft, it tears easily down at the bottom in and splinters to where you have to pick little pieces off go back to the original that had the clear tape

Good golf grips for the price.

Wanted to change my grips to a different size and colour to refresh my clubs. Didn't want to pay the top prices for what is more of a test aswell. So though I'd give these a go. Came with plenty of tape and was really easy to apply. (Reccomend using plenty of grip fluid) Look and feel really good and am happy with the quality. A great alternative to the more known brands. At a fraction of the cost we'll work a go.

There is no solvent, removing tool for old grips or shaft holder included. The grips fits very easy-to-fit

Alles bestens, Griff wie beschrieben. Einfache Montage, das Set enthält alles, was man für den Griffwechsel braucht.

Ich erneuere meine Golfgriffe schon seit einigen Jahren. Bislang mit Lamkin oder Golf Pride. Aber die Neugier hat gejuckt also habe ich diese All-in-one Set bestellt. Zum Vergleich: Bei den normalen Golf Pride Griffen habe ich bei 14 Griffen Gewichtsunterschiede zwischen 48 und 53g festgestellt. Neue Lamkin Griffe (9 St.) habe 6x51g, 2x52g,1x53g. Und bei 8 neuen Golf Pride MCC habe ich Gewichte von 5x47g und 3x48g gemessen. Dieses Billigset muss sich da nicht verstecken. Die 13 Griffe verteilen sich mit 1x51g,7x52g und 5x53g. Das Gefühl und der Durchmesser dieser Griffe hier entspricht den Golf Pride MCC. Keine Ahnung, ob im Laufe des nächsten Jahres ein anderer Abrieb oder Abfärbung oder so im Verhältnis zum MCC auftritt. Aber der erste Eindruck ist überzeugend. Und es ist wirklich alles dabei - incl. einem Link zu YouTube mit einem How-to Video als QR-Code (englischer Untertext). Bei dem Entfernen des alten Tapes gibt es auch andere Methoden - aber man findet einige Anleitungen auf YouTube. Mein Fazit: Wer keine zwei linken Hände der kann hier unbesorgt zuschlagen.

Perfect Look gear and they have good grip Good quality