IANIYA Swivel Floor TV Stand Height Adjustable Bracket Entertainment Stand for 32 to 65 inch TV | 3-Tier BlackTempered Glass Multi-Function TV Stand

I bought it to hold up a 43" flat screen. The instructions are good and all parts and tools are provided.The unopened package is significantly heavy, but the finished stand is actually quite manageable. You assemble the lower portion upside down and you have to flip it over once you have the last glass plate attached. It isn't impossible for one person to flip it, but it's good to have help.Most of the parts are labeled. The parts that aren't labeled are duplicates of a labeled part, but parts are pretty unique by appearance (e.g. all 4's look alike).The only problem that I ran into was the rails that you mount on the back of the TV. You adjust the height of the TV by setting lifting the TV rail onto the back frame at the desired height. You then screw a locking bracket into the bottom of the back frame. There are two brackets that slide onto the left and right side bracket. The brackets, however, only fit the bottom most slots. The higher slots were slightly too wide. I had to use a pair of pliers to bend the locking slots into the proper width.So far, it is a good product.

I used this for a 50" tv. What made it easy to put together was me verifying that all of the parts were there and gathering them through the step by step directions. The box was heavy but very well packed so all three glass shelves were intact. The instructions were clear so I had no problem putting it together. Once I set my tv on it, I was so pleased that I chose this because I initially considered putting it up on the wall, but since I recently bought my new place I didn't want to put holes in the wall and I really like the option of moving the tv to a different location if I choose. It actually does swivel and the smoked glass makes it look classy and modern. It is well made and well worth the money.

This TV stand was amazingly easy to assemble. There were no written instructions, only pictures, so we were initially very skeptical about putting it together. However, all the parts were clearly labeled, numbered, and individually wrapped, and the pictures in the instructions were very clear and easy to understand. We finished assembly in under two hours! The stand looks great, and the tempered glass shelves are very sturdy. All our TV accessories will easily fit—the set top box, DVD player, and blue ray player. It’s a very stylish-looking piece of furniture, and well-worth the price.

Well I wish I could write something here but I'm missing 1 piece that goes into the neck of the stand, #19. If/when I receive the part I'll update the review. Thankfully I didn't cut anything up or remove stickers yet. From what I see, everything else looks sturdy, the glass is fairly thick and heavy. The metal/aluminum shelf supports are intact, no dents. Just stinks, I tore my old stand down and was ready to put this together for movie night tonight. Looks like tv on the floor until this is resolved.Edit-18Oct20, --piece #19 was tucked inside #11 but not labeled. Which I only found out after I started building and really at the picture descriptions on the instructions. So the tv stand is now complete and I have to say I love the stand. It seemed a bit weak with the treaded rods being thin and not sure if I screwed them in all the way. But after adding the aluminum pieces and adding the weight I feel it is a solid piece. My 55"Samsung hung with the included bolts. I only needed someone's hand when flipping the glass tops over and when hanging the TV. It fits my sound bar, a PS4, my router, my record player, ADT panel, and internet provider box, and still room for other things on the shelves. My only gripe is that my cords are just a little short to run from back of the tv, through the wire management they provided, and to the power/surge strip. I'll have to figure something out because I had to place the optical sound and the cat-5 to the Fire Stick running outside the ziptie like thing they included. I'm thinking I'll run the power strip up the back and attach it between the 2 wire management clips, I'll just have to order longer fiber and make a longer cat-5 but I think if I attached the power to the rear it would look much better than what I got now! Also a good note, Customer Service emailed me same day as mine asking about the missing part. They sent 2 separate emails, stating that they were sending me the missing piece and apologized. I did email them back saying I'm an idiot and found the part I thought was missing, no need for the part to be shipped. I hope they got it. I increased my review to 4 stars because of the hidden and unlabeled #19.TLDR, this TV stand is worth the hassle so far, with only mislabeled pieces making it somewhat confusing during the build. Fits everything I need on the shelves with room to spare. Went together fairly quick with only needing help to flip the stand over, and then again to hang the TV. I'm kinda upset I waited so long to buy a stand like this. My only struggle is hiding the wires in the rear. 5 stars

This was a very nice table as described, especially for the price. It is very easy to put together (even with picture only instructions) because all the parts are in bags and numbered. I thought I was missing a bolt, but I found it in the cap that covers it (check caps if you are missing any bolts). This was a gift to my mother and she loved it! I would even consider one for myself if I needed one.

Love my tv stand. It is perfect for putting things for display. Fits my tv well and seems secure. It was also easy to put together. Would definitely recommend to others.

I have to have my TV in kind of a weird spot, so I have my couch at an angle. I needed to get the TV on a stand that could swivel out at an angle; this stand fit the bill. Great value, looks sharp, supports my 55 in Roku TV like a champ. Now I don’t have to turn my neck or move furniture to watch Netflix!

Happy with