Triple Monitor Mount for 17 to 32 inch Screens, Adjustment Gaming Triple Monitor Stand with Swivel, Tilt, Rotation, Clamp & Grommet Kit

Very sturdy and solid. Fits three 27 inch LG ultra gear monitors with no problem! Takes a bit to set up but as a whole one person who reads the instruction should have no problem getting it going. My biggest pro for this product is how functional it is as far as how well it can fit on various desks sizes. My desk has an awkward metal rim around it that makes any type of product struggle to fit properly onto it, this stand offers the ability to expand the clamp to get it over bigger desks.

Overall I love this item and unlike my last purchase, which I had to return, I plan to keep this one. PROS: Has two extension arms, meaning you have the middle part that connects to each side, plus an arm AND an additional arm, most would only have the middle part and one extension arm. This means for guys like me with 3 32" monitors you have the option of having them sit horizontally without having to sacrifice, IE one monitor is partially blocked by the other. As I noted I had to return a different brand and that was because of this. Weight - My monitors are roughly 15 1/2 pounds each and I didn't have any issues moving the arms around with the monitors connected. Says a lot about the stability that I'm talking about this product being able to hold a 15 lb monitor on a second arm extension, as opposed to one. Install time - About 10-15 minutes, 20 if you factor that I'm a moron who didn't check placement before setting everything up, then forced to disassemble and reassemble in the proper area. Bad joke aside was straight-forward setup but use your own screwdriver, the one that comes with this is limited. Range - Similar to what I've used in the past. Easy to lift upwards, downwards, tilt the monitor, rotate to portrait. Standard stuff CONS: Only one. The middle pole is a decent size, but not tall enough for me. If you're like me you want your monitors higher to reduce strain on your eyes (I'm 6' so I prefer not having to look downwards so much). In my situation even when I had the middle area at it's highest my middle monitor was too low. I ended up using a stand for my middle monitor instead of connecting. Checked with the manufacturer and unfortunately there wasn't an option to buy a taller stand or add an extension, so while I give this 5 stars IMO it's really 4.5 and only because of this limitation. TLDR - Great product, no regrets purchasing it. Can hold 3 horizontal 32" monitors but middle might be lower than you prefer.

Great quality for the price. I attached several pics and a video of it mounted to my electric sit/stand desk. I did order a thick metal plate designed for these mounts to sandwich on the desk being that my desktop is particle board I was concerned it would snap the desk where it clamps on at. I’m running 3 older 24" dell IPS monitors that are a bit heavier than most newer monitors and it handles them just fine. The gas powered arms were a little tricky to get adjusted just right and I still have one that needs some tweaks. When I adjust the screen menus with the screen buttons the monitor will slightly raise up on its own. Kinda annoying but I have not found a way to lock the arms in place once you have them setup the way you like. There is also only one screw underneath on the clamp and can be somewhat difficult to get tightened as the entire unit wants to turn. There are other units out there with dual screws that look like they would work better and prevent the headache of turning the entire setup when tightening. Not to mention they seem more secure. The cable management is great as I have two separate inputs going to each monitor and the power cable. All fit nicely in the sleeves and clips. Lastly there are no input plugs on this stand. Not really a con as you can clearly see that in the pictures and not docking any stars for it either. However there are other units out there that have built in USB ports, mic ports, etc that run around this same price point. All in for the price I would absolutely buy again and has been rock solid for a little over a month now with my sit/stand moving up and down multiple times a day with no wobble. Oh and the detachable vesa mounts that just clip into the arms are an amazing thing when installing your monitors. Just buy it. Hahaha

I decided to go with a 3 monitor setup rather than my usual 4 monitor setup (2x2) as I wanted to reduce having to look up at the 2 monitors above. My monitors are 27" and when trying to do a horizontal setup, there is just too big of a space in between monitors. Meaning, if I put the third section of the outer arms in, they are just too spread apart. I could adjust this, but the arms would then hit the wall so I would have to pull my new desk out further, which I don't want to do. For now, I had to rotate the two outer monitors to vertical, which dims the screens a bit and messes with the resolution. I also wanted to make sure that the mounting bracket to the desk doesn't damage the desk. The box does not come with sufficient protective pads, so I use the round rubber peel and stick rubber feet from a switch and that seems to work fine. No slip, but over time this might leave a mark so I'm looking for something better for that. My only other options are to get larger or smaller monitors which I'm considering doing as I need move toward 4k monitors for my content creation work. Final thoughts: The mount is nice and the cable management easy. Installation was easy. Works well on my L-shape Autonomous desk. I will need to change my monitors to larger or smaller. Smaller than 27" would use two sections on arms for horizontal layout. Larger than 27" would use three sections on arms for horizontal layout. They need to provide better padding for the desk mounting bracket. Price is okay.

I have used this for a couple of years now and i love this stand. It has a very strong build quality and is easy to be put together. The range of motion is flexible so you can change the monitor with ease.

Ich habe wegen meines dritten Monitors auf den Huanuo 3er-Arm umgestellt – und ich hätte es viel früher machen sollen. Die Konstruktion steht überraschend stabil, nichts wackelt, nichts knarzt, und selbst bei drei 27-Zöllern bleibt alles genau dort, wo es sein soll. Die Einstellung der Gasdruckarme ging schnell und fühlt sich richtig hochwertig an. Mein Schreibtisch wirkt jetzt deutlich aufgeräumter, ich habe mehr freie Fläche und kann die Monitore endlich exakt so ausrichten, wie ich es für Gaming und Arbeiten brauche. Für den Preis hätte ich nicht erwartet, dass das Setup so solide wird. Absolute Empfehlung.

This Triple Monitor Stand Desk Mount exceeded all my expectations! The quality is absolutely fantastic—super sturdy and built with high-quality materials that feel like they'll last a long time. It supports all three of my monitors flawlessly, I have a 24", 27" and a 32" ( don't ask ), with no sagging or wobbling at all. The assembly process was super easy. The instructions are straight-forward and easy to follow, almost like building LEGO. Took me about 1 hour to set it all up. I can't recommend this stand enough. If you're considering it, go for it you won't be disappointed. I’d 100% buy this again if I ever needed another!

Easy to assemble Can hold my very heavy 36" monitor with no problem.

I dislike that can’t rotate it perfectly