Stainless Steel Curved Ends Tapered 18mm 20mm 22mm 23mm 24mm Metal Watch Band Flexible Watch Strap Replacement Bracelet Deployment Double Flip Lock Buckle Silver Black

This is an excellent enhancement to the Casio MDV106. Although installation is a little tricky, the bracelet DOES FIT the Casio Duro. The trick is to start one end of the spring bar by placing it directly into the spring bar hole and then rock the end link into the lugs. Then depress the extended spring bar and push the end link fully into place. At this point, you’ll have trouble getting the unseated end of the spring bar to seat into its hole. So use a small screw driver, pushpin or the provided spring bar tool to gently push the unseated towards the case so it will align with its hole. A couple nudges using this method and the spring bar will eventually align and seat into its hole. Then use the provided spring bar tool to press each end of the spring bar outward to ensure it is fully seated and you’re done. Although this sounds tricky, it really itsn’t difficult and can be done in minutes. Anyway, if you can follow the above guide, this bracelet will be an excellent addition to your watch. It’s very well made for the money. Solid links throughout, good weight and tolerances and nice finishing. The clasp is also pretty solid for the money. Overall a perfect complement to the Casio Duro, especially if you have the two tone black and gold Duro, since two tone bracelets are hard to find for this model. Anyway, give it a shot and you’ll be glad you did.

Excellent product. Replaced a broken watch band on my $600 Seiko watch for a fraction of a Seiko band. After 6 months it still looks good and works perfectly. I do construction work and it is constantly exposed to sawdust, Sheetrock dust, sweat and temperature fluctuations. I wear it in the shower every night after work to clean the days dust off it. Holds up well. It is definitely a lesser quality than the Seiko band but it has not disappointed. I bought a silver one for another Seiko watch that had been in my jewelry box for years with a broken band. Brought it back to life again.

For the money, this is an excellent Jubilee band. My watch is the Casio Duro diver watch. It is really hard to get the curved ends to attach. The spring bar tips are really hard to get in to the holes. Other watches may be just fine. Some people say that you need to get one pin into the hole, then you can maneuver the second one in. Well, I found that the angle to get the first pin in then risks scratching the case of the watch when you try to get the second one in from that tilted angle. (I am adding photos that show the scrapes on my case from trying that.) The curved ends edges are really sharp and should have been properly buffed. But it is an inexpensive band after all. I found what works best for me and the safest for the watch is to just place the curved end into the case like normal with the spring bar in it and lined up to the pin holes. The spring bars ends will be laying above them on the case. Now, take the tool and press one sides pin in to allow it to drop towards the hole. It will likely not go in the hole yet, but keep it down there and go ahead and press in the pin on the other side to get that sides spring bar tip down in the case as well. Now carefully, slowly move it around so that you can get one pin to drop in it's hole. Then do the same with the other side, always being careful to keep the tip down in there so it doesn't come up and extend out. One thing that really bothers me, is that the notch they have to access the pin tip with the tool is too small and it takes a lot of patients to get the pins in (and out). Once you get this done, you will likely not want to take it off. If you are someone with a lot of bands with quick release and like to swap often, this may not be the band for you. Another thing is that the spring bars that they include have less girth than the Casio spring bars from my watch. These thin bars are kinda sloppy inside the the curved end piece and may make it harder to get the tips into the holes. I used the Casio ends. Luckily they slid through okay and I could steer them to the hole easier. Sizing is also a bit tough. Take your time and a magnifier may be useful for this, as well as the attachment process. I also bought the silver and gold version for my gilded Duro. I think it is quite good looking for the money. (See photos)

Put this on my seiko 5 and it fit perfectly! Great look and quality. Easy to install myself.

Let me start by saying that I am a loyal Casio Duro (MDV 106) fan. I've collected all the available models and particularly appreciate that you can still find the Duro with the iconic Marlin logo at a reasonable price on Amazon. My latest acquisition was the green Duro, completing my collection. Along with it, Amazon recommended a stainless steel replacement bracelet, claiming compatibility with the model. At $19.99 (half the price of the watch), I decided to give it a try, expecting a premium experience given the reputable seller. The bracelet arrived in generic packaging with "Watch Band" printed on top—simple but decent. Inside, the bracelet was heavily wrapped in plastic, which, while protective, felt excessive and cumbersome to remove. On the plus side, the package included a pin remover, several spare pins, a bracelet adjustment tool, and an instruction manual. This thoughtful inclusion raised my expectations, and I was initially impressed. Unfortunately, my enthusiasm quickly turned to frustration when attempting to fit the bracelet to my Casio Duro. Despite Amazon marketing the product as compatible, the original pins that came with the watch did not fit the bracelet. Instead, the pins supplied with the band were much thinner, raising concerns about their durability. The real challenge came with aligning the bracelet to the watch using the provided pins. After over an hour of struggling, I could not achieve a proper fit. The misalignment issues were so severe that I doubt even a professional jeweler could make this bracelet work with the Duro. While the added tools and packaging suggest effort, the bracelet fails to deliver on its promise of compatibility with the Casio Duro. The mismatch in pin sizes and the poor fitment make it impractical for its intended purpose. For these reasons, I cannot recommend this band to any Casio Duro owner.

Ho acquistato il cinturino in metallo Juntan da 22mm in colore argento per dare un tocco più elegante al mio orologio Casio Duro, e sono rimasto molto soddisfatto. La prima impressione è ottima: il metallo ha una buona finitura, né troppo lucido né troppo opaco, ed è molto piacevole al tatto. La forma affusolata con estremità curve si adatta perfettamente alla cassa dell'orologio, dandogli un look più raffinato e continuo. Il cinturino è flessibile ma robusto, si piega bene seguendo il polso, e non tira i peli come spesso succede con i cinturini in metallo economici. La doppia chiusura a scatto è sicura e facile da aprire/chiudere: tiene bene anche durante le giornate più movimentate. ✅ Pro: Finitura elegante e curata Comodo da indossare tutto il giorno Si adatta bene a vari stili di orologio Chiusura sicura e affidabile Buon rapporto qualità/prezzo ❌ Contro: Serve un po’ di pazienza per regolare la lunghezza (ma ci sono i perni a molla) Non compatibile con casse molto curve o particolari senza piccoli adattamenti In conclusione, è un ottimo cinturino di ricambio per chi vuole un look più sofisticato senza spendere troppo. Lo consiglio a chi cerca un’alternativa in metallo ben fatta e dal design classico ma moderno.

I bought this Jubilee bracelet strap (22mm) from Amazon Japan since I couldn’t find it on Amazon India. I ordered it along with a watch, so it turned out to be a good deal as I saved quite a bit on shipping charges by combining the orders. The quality of the bracelet looks good and feels sturdy. It should fit any 22mm lug width watches, so I’m planning to try it on multiple watches. The box included the bracelet itself, some extra end links, and a small toolkit to remove bracelet links, which is a great addition and very handy. Regarding shipping, Amazon and DHL handled it perfectly. The customs process was smooth and fully managed by DHL, so I didn’t have to do anything on my end. The product was delivered three days earlier than the expected date, arriving within six days, which is very impressive for an international shipment. The packaging was excellent - both the product box and outer packaging arrived without any damage, which is not always the case with overseas deliveries. Overall, I am very happy with this purchase. For the price, the quality is great, and the delivery experience was flawless. Definitely a five-star product for me.

It’s great. Just wish it had smaller sizes. You can only remove 6 notches maximum.

excelente calidad, perfectamente compatible con el Casio marlín pareciera que así sale de fábrica, a mí no me costó trabajo colocarlo cada quien la experiencia que tenga

Très satisfait du produit des bracelets très confortables facile à installer je remercie le vendeur