AsBellt[2 Pack Tempered Glass Screen Protector for Galaxy S20 Plus and S20 Plus 5G 6.7'' [Fingerprint Sensor Compatible][Full Adhesive][3D Glass][Case Friendly] for Samsung Galaxy S20 Plus/S20+ …

This screen protector went on just like the video shows. The finger print sensor works just fine after it's on and there's enough room around the perimeter for a case to sit without overlapping. It feels just like the bare screen. Maybe better.That said, installing this one is not exactly simple. There is a process and you have to watch the video and follow the instructions. If you do and take your time, the results are as good as or better than protectors that you just peel and stick. The amount of adhesive included in the little tube is EXACTLY as much as you need and no more. It doesn't leak out the sides and onto the rest of the phone. That being the case, you do have to give it time to get all the way to the top and bottom edges before you cure it with the light. Just be patient.I have tried another protector of this type from another brand/seller. It was 4 times as expensive and the result was terrible. Don't think you have to pay more to get a quality screen protector. This one is worth every penny and then some.

***EDIT from 10/31/2020***The first protector I installed lasted 2 days before I dropped my phone 6 inches and it cracked across the protector. It protected my screen, but the protector should not have cracked that soon. A few days after, I noticed some prominent scratches on the glass, and I do NOT keep my phone in my pockets with any other items... No explanation.I removed the protector, and the 2nd protector's film backing would NOT come off with the sticker, like it had gotten stuck over time. The end-result was a bubble-filled application because I had to use my fingernails to get the protector off.I ordered another pack of these protectors, and the items they included were DIFFERENT. They gave me the SMALLEST speaker cover in the world, so small it was impossible to apply correctly. I ended up getting a lot of glue in the front speaker of my phone that I had to scrape out with a sewing needle. The first application ended in a bubble-filled mess, and the second application leaked glue all over my phone. THE NEWEST MODELS OF THIS PROTECTOR DO NOT CONTAIN THE SAME ITEMS AS THE ONES FROM ~MARCH!LONG STORY SHORT: Do NOT buy this screen protector. It is awful, it is messy, and it very well could ruin your phone because it does NOT include the proper covering equipment. The fingerprint sensor also works maybe 75% of the time, and is VERY SLOW to respond. The application is very touch-and-go. Please read my first review below -- I GOT LUCKY. I do not recommend this product to anybody.INSTEAD - Purchase the AMFILM Galaxy S20+ screen protector. The installation was much easier and the packaging and items included are much more professional. I applied it easily with minimal effort, AND THE FINGERPRINT SENSOR WORKS BETTER.-- OLD REVIEW, March 2020 --(Watch a full installation video BEFORE beginning, and the process becomes very easy! Install the tools and all stickers first. Up until the point the glue goes down, and the protector is on, KEEP THE SCREEN CLEAN. Start in a low-dust area, if possible.)The good:I easily found a video (and they included a link with the order) to install the screen protector. I was a bit apprehensive at first due to the glue that is used, but the video makes it very clear what is required. The included UV lamp to harden the protector was a unique experience.The screen protector was very easy to align using the included tools, and the remove-able "part number 3" really made it easy to perfect the alignment before dropping the protector.Once the glue was spread, I aligned the screen protector as per the instructions, and watched as absolutely 0 air bubbles formed. Every inch of the glue spread across the whole phone, after a SLOW + SLIGHT bit of tilting, and worked out any possibility for an air pocket to exist.The fingerprint sensor STILL works, but you should register your fingerprint again. It might help to register the same finger multiple times for a better effect. I haven't noticed any significant slowing of the response time on the sensor, but it does seem you have to press a bit more firm. This is an insignificantly easy trade-off to make for a quality protector, and the sensor still does what it should.The bad:THIS PROCESS IS MESSY. This is the only negative I am able to see, and if you are careful and utilize the stickers properly over your buttons, you will not have a problem. Just continuously clean as I describe in the next paragraph.Double... triple... quadruple check once you have the screen protector down. Before you fully cure the glue with the UV lamp, you MUST CLEAN UP any glue that has leaked. Go light on the UV lamp at first, and continue to clean every few seconds. Then, once the phone is clean, let it experience the UV for 5 minutes. Wash your hands if you get ANY glue on you, because it will stick to everything you touch. It is VERY hard to get it off of your phone if you cure the glue. The glue does not damage the phone, and DOES wipe off after some work.

This is one of the few tempered glass protectors for S20 series. Installed it on my S20+, not easy, but if you take your time and watch YouTube video first it can be done with good results. Once installed it has a good feel and appears to be quality product. Initially very happy. As I read in other reviews you may have to redo fingerprint login. After installation without redoing it did work but only 50% of the time. I deleted the existing fingerprints but when trying to reinstall it can no longer "see" enough of my fingerprint to re-establish. I have tried numerous times but have essentially lost that feature which is a significant decrement to my S20+. Disappointed because it does appear to a solid protector, but unfortunately too solid.UpdateWas contacted by Seller and asked if I would try again if they provided a new kit. I installed the new screen protector today and happy to report the fingerprint ID is working correctly. Not sure why it didn't work the first time but happy to have that feature back. Seller was very proactive in helping to resolve the problem. Updated this product to 5 stars.

It's not hard to install but it's not that easy. One suggestion I advise is to use less glue. You don't need the whole bottle. If you do glue will get everwhere and even with the guards it gets on the buttons and your speaker. It's not fun getting the glue off. The glue even got on the red plastic holders and when I tried to take them off it pulled up my screen so I have tiny bubbles on the bottom. (Not that noticable took a picture).They also suggest wearing gloves but wiping the glue off with big plastic gloves is very hard. I had to take it off but my skin is a bit irritatedYou get two screens but only 1 plastic liners I'm not sure how reusable they are.There's also a bug oval in the center. Not sure if that's just extra glue or whatOther than that the screen feels nice and fingerprint reader works.Edit: took my phone in the shower with me. The glue started leaking out. It's been days since I put the screen on too. Just a messy experience, and I really feel like it's because there's too much glue in the tube.

Installing this protector was a little more involved than I'm used to. The first one went on perfect. Feels great, and doent pickup as fingerprints as much as other screen protectors ive used. and the in screen fingerprint scanner works perfectly, but you need to relearn fingerprints after installation.The second one in the package had a problem. The glue leaked out the top and bottom and welded itself to the top and bottom tool guides. When the guides were removed it caused 4 small unfixable bubbles where each of the tabs touched the screen protector. The bubbles are small and the protector is still usable, but its still frustratingI decided to change this review to 5stars because of the customer service I received. The seller reached out to me after reading about the issues with the second screen protector and sent me a replacement no questions asked.great to see someone who stands behind their products.

El mejor protector de cristal templado, pues se ajusta excelentemente a la pantalla de tu Galaxy s20+, además, queda tan bien acoplado, gracias al líquido, que parece la misma pantalla del dispositivo. Total nitidez y extrema sensibilidad; probé otros dos similares y tuve que devolverlos porque, aunque quedaban bien, no reconocían la huella; este lo hace como si se tratase del propia pantalla (es rígido, no elástico, pues es cristal templado). En cuanto a su instalación, a pesar de que pueda parecer farragosa, es muy sencilla: no es necesario fijar las plataformas, como aparece en el vídeo tutorial, puedes verter el líquido directamente sobre la pantalla, como aparece en el vídeo, y fijar tú mismo el protector, pues te permite moverlo durante un tiempo antes de secarse definitivamente; el agujero para la cámara frontal te sirve de guía para cuadrarlo correctamente. Esto de fijarlo tú mismo sin las plataformas lo digo porque yo las puse y el líquido, que termina llegando a todos los extremos de la pantalla, cuando llegaron hasta estas -incluso poniendo los protectores- las pegaron al mismo protector, levantándolo cuando intenté extraerlas, por mucho cuidado que tuve. También aconsejo sellar la parte superior, donde se halla el micrófono del oído, los botones del lateral de volumen y encendido, y toda la parte inferior (micro, altavoz y usb) con desafil celo, con el fin de asegurarse completamente impermeabilizado y no permitir la entrada del líquido, como he hecho siempre que he utilizado este tipo de cristales templados, que son, sin duda, los que mejor calidad ofrecen (de ahí que sean un poco más caros que el resto, aunque hay que decir que esta vez vienen dos unidades y no una). La atención de la empresa es fenomenal, en cuanto les comenté lo que me había ocurrido, que se había estropeado un protector porque había quedado adherido a una de las plataformas, me enviaron gratuitamente otro pack y se interesaron cómo me había ido con este. Respecto a Amazon, como siempre, tranquilidad de saber que compras con total garantía.

Tutoriel sur YouTube à regarder pour mettre la protection correctementPas trop dur à faire, avec un peu d'applicationLa protection en elle même à l'air solideLa sensation de l'écran tactile sous les doigts est naturelle, le verre trempé est relativement finLe lecteur d'empreinte marche bien avec, il faut juste appuyer un tout petit peu plus fortPour le prix, je recommande vivement pour protéger votre S20+

Ich habe mir leider beim Kauf meines S20+ in einem großen Elektronikmarkt eine Schutzfolie für viel Geld inkl. Anbringung andrehen lassen. Diese hatte eine deutlich sichtbare Aussparung im Bereich des Fingerabdrucksensors (Aussage: Muss so sein, funktioniert sonst nicht.) Sah bescheiden aus und der Fingerabdrucksensor funktionierte nur mit sehr viel Druck und mehrfachen Versuchen. Die Folie hielt ohne Sturz bei vorsichtiger Beanspruchung ungefähr 4 Monate. Dann kam plötzlich wie aus dem Nichts ein Riss.Heute habe ich dann dann diese Folie angebracht (Vodeo Tutorial dringend empfohlen!!). Bis auf den UV Strahler, der sehr heiß wurde, machten die Materialien einen guten Eindruck. Über die Haltbarkeit der Folie kann ich natürlich bis jetzt nichts sagen. Was mich aber begeistert hat war natürlich, dass es nun kein hässliches Loch mehr im Display gibt. Und das beste ist, dass der Sensor jetzt trotzdem gefühlt besser anschlägt. Ich habe jetzt überhaupt keine Verzögerungen mehr. Insgesamt wirkt das Display jetzt sensibler als mit der alten Folie. Ein neues Einlesen der Fingerabdrücke war bei mir auch nicht nötig. Die Abmaße passen auch zu meiner Schutzhülle.Falls es noch zu anderweitigen Erfahrungen in der Zukunft kommen sollte, werde ich diese hier beschreiben. Bis jetzt: Nicht zu toppen für den Preis! Alle Achtung!

Bought this for my new Samsung Galaxy s20+. Didn't realise it was a 'do it yourself' item, where you apply the 'glue' separate from the protector. I was intimidated by all the parts in the box at first, but the video provided via YouTube was a massive help for putting the screen protector on. Stick on strips are provided to protect your buttons, and with the video, installation turned out to be pretty simple. Just be careful of the empty glue capsule, move it far away as soon as you're done with it, or it can leak little drops of the liquid everywhere.Screen is really smooth, super clear. No silly missing/ indented piece for the fingerprint screen. Overall, super awesome screen protector. Just make sure to dedicate your full focus on the installation.