Counteract 4OZ-B4 Centrifugal Force Tire/Wheel Balancing Beads - Off-Road Vehicles, Light Duty Truck Tires, (4) 4oz Balance Bead Bags, (4) Valve Caps and Cores

I have always used Equal powder for balancing but I tried these. They work awesome! Download the app and put in your tire size. It will tell you what size to use. I stocked the 3, 4 and 5 oz. No measuring. I hate those type. Never worked for me. Just drop the bag in, air it up and go. Make sure you remove all external weights! We drove the truck at 80 mph and it was smoother than it's ever been. Will buy more for sure. I have my own tire machine now.

These worked very well for my tire. perfect balance with no complaints. I replaced the rim weights which did not work as well as these. I am very pleased.

I got tired of paying through the nose to replace a tire on one of my motorcycles. So I bought the equipment to change them myself. I use these beads to balance the tires. They are self balancing and always working. I haven't changed a tire that had these beads in but I have been warned to vacuum them out before they make a mess on the floor when I remove the tire off of the rim. I'm happy with them and will continue to use them.

I use counteract for my motorcycle tires and my pickup truck's nice set of Alcoa wheels. My only gripe is sometimes the bead bags get torn open during transit.

Mounted a new set of 28x10x14 tires on my Pioneer 1000 5. Tires were a bit rough and hopped at 20 to 30 mph. Figured beads for slow speed symptoms would be a waste. I was totally wrong. The hop is all but gone and my wheeler rides smoothly 0 to top end, now. Super easy valve stem install, takes 3 to 5 minutes per tire. Everything needed is included in the packages. Great customer service with my attention to detail questions... I will be using Counteract on all my rigs. Thanks

Used these on my new boat trailer tires along with the Schrader valves recommended for self-balancing tires using micro beads. Tires running smooth at speeds up to 70 mph.

Great product like the app for it makes very easy to use.

Do not use this in your motorcycle tube type tires. Do some YouTube research and find out how this works before you buy. Not like I did.... Used this in my ADV bikes both with a 21" Front wheel and 18" Rear with new Kenda 270 and 761 DS type tires on each respectively, the glass beads made my tires, most notably the front bounce like a fast dribbling basketball at speeds between 20 to 45+mph then at around 50+ to 55mph they start to "dampener" the tire and the bouncing does smooth out but you can still feel a pulsating oscillated vibration on/off like on a metronome type scheduled rhythm even at 60-70mph... In other words you MUST be going over a certain speed to get these to evenly distribute within the tire... They do not work at all under 50mph and make things many times worse than just a simply unbalanced tire. At 35mph in traffic it drives me crazy! Today I removed the tire and tube from my DRZ-400S in order to try and remove them from the Tusk heavy duty 2mm tube that I spent 25$ on. I managed to shake them out little by little , took about 2 hours...Saved the tube it seems...Prior to this I punctured a cheap tube I tried to install just to get it done, that's when I went ahead and shook the original tube to get them out. I will try it tomorrow and see without these how it rides/feels... I also have purchased a tire balancing stand recently with stick on weights to do it right! but first I want to see from the beginning how it goes now after removing this junk. These might work under some circumstances but not for my application. Yes, I weighed them exactly as instructed. Personally I think they are a waste of money and will ruin your tube unless you can get them out like I did. Play your cards and take your chances. I lost 20$ on the product and 12$ on the first tube I pinched... I do blame that on this product too. Now I have 7 MORE EXPENSIVE HEAVY DUTY TUBES to remove this crap out of. Hopefully... I put this garbage in 4 of my 5 motorcycles...Lucky me.

Had these in the tyres for a few month now, heres how I find the results: they did help with my 4 x 4tyres 17 inch Vector 4 season gen 2 on alloy wheels, the reduction in shudder at low speeds was noticeable but in excess of 70mph ( I know ) there was a slight degree of shake, but anyway I try not to do that, it is easier than balancing and applying lead weights, but maybe not as good as having decent alloys in the first place, easy to put in? yes, though removal could be tricky so be sure you need them.

Ich verwende dieses Granulat seit 20 Jahren am LLKW Auch nach 40 000 km muss man nicht nachwuchten. Selbst wenn unterwegs zb die Felgen "geditscht" werden, läuft das Rad sauber

Thrilled with my recent purchase! Initially hesitant about incorporating beads into my truck tires, I took the plunge after extensive research and numerous positive online reviews. My 2009 Ford F150, showing signs of wear and exhibiting typical road-induced vibrations, prompted me to explore dynamic balancing solutions. Despite having undergone tire balancing and alignment procedures, I decided to experiment with these beads to enhance the driving experience. To my delight, the addition of 4 ounces in each tire proved to be the optimal amount, resulting in a remarkably smoother ride. While some rattles and shakes persist on uneven terrain, the highway driving experience has been rejuvenated, making it a true pleasure once again.

Used these to balance the tires on my motorcycle. Very easy to use and worked perfectly.

Sorry, it took so long to do the review: I had a hard time getting the Beads in the tire, I Had to use a Turkey Baster to put them in as the tires were on rims! ( Two Hrs ) Results around town Good, Smooth & no vibration. HWY Used to have bad vibrations over 100k, Now good up to 120k then small vibrations,4oz per tire (225-65-17) may not be enough weight but I am satisfied with the results. Yes, I might get them again but will install when mounting tires!