YIHUA 948 Standard Desoldering Station, 80W, with Auto Shutoff, Variable Precise Temperature (716°F ~ 896°F), ºC/°F display, Sleep Function and More.
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

YIHUA 948 Standard Desoldering Station, 80W, with Auto Shutoff, Variable Precise Temperature (716°F ~ 896°F), ºC/°F display, Sleep Function and More.

4.2/5
Product ID: 223886828
Secure Transaction

Details

  • Brand
    YIHUA
  • Item Weight
    4.2 Kilograms
  • Voltage
    1.1E+2 Volts
  • Wattage
    8E+1
  • Display Type
    LED
Auto shutoff & sleep mode
🔥80W high power output
🌡️Precise temp control 716°F–896°F

Description

⚡ Desolder like a pro—fast, precise, and effortless!

  • SMART SAFETY FEATURES - Auto shutoff and sleep mode protect your workspace and extend tool lifespan.
  • CUSTOMIZABLE MAINTENANCE - Easily clean or replace filter tubes to match your usage—cost-effective for daily pros or occasional users.
  • POWERFUL 80 W PERFORMANCE - Tackle large batches of solder joints with consistent, high-powered suction and heat.
  • PRECISION TEMPERATURE CONTROL - Dial in exact heat between 716°F and 896°F for flawless solder removal every time.
  • EFFORTLESS ONE HANDED OPERATION - Streamline your workflow with single-handed desoldering—no juggling tools, just pure efficiency.

The YIHUA948 Standard Desoldering Station delivers professional-grade desoldering with 80W power, precise temperature control from 716°F to 896°F, and smart features like auto shutoff and sleep mode. Designed for one-handed operation, it combines stabilized nozzle heat with powerful suction for efficient solder removal. Includes multiple nozzles, filters, and cleaning tools, backed by a 12-month US warranty and 24/7 support.

Large manufacture image 1
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5Small manufacture image 6Small manufacture image 7Small manufacture image 8Small manufacture image 9Small manufacture image 10Small manufacture image 11

Specifications

Included Components1 x 948 Desoldernig Station, 1 x 948G Desoldering Gun, 4 x Desoldering Nozzles (Additional), 1 x Set of Cleaning Pins, 1 x Desoldering Gun Holder, 1 x Cleaning Sponge, 2 x Filter Springs, 2 x Ceramic Filters, 10 x Filtration Adsorber, 1 x Heat-Resistant Pad
Number of Channels1
Upper Temperature Rating4.8E+2 Degrees Celsius
Lower Temperature Rating716 Degrees Fahrenheit
Global Trade Identification Number05060497922310
ManufacturerGuangzhou Yihua Electronic Equipment Co., Ltd.
Part NumberYihua 948
Item Weight9.24 pounds
Product Dimensions9.21 x 7.95 x 5.28 inches
Country of OriginChina
Item model number948
MaterialMetal, Ceramic, Iron, Plastic
Power Sourceac
Batteries Included?No
Batteries Required?No

Have a Question? See What Others Asked

Where can I get the instruction/operating manual?
What is the part number for the heating element?
The yihua 948 desoldering station comes with 4 spare nozzles. are these the same ones as the #948n desoldering nozzles set that has 4 different sizes?
Is this the Glarses gun?

Reviews

4.2

All from verified purchases

D**R

I should have bought this a long time ago…

TLDR up front… Buy it. Well worth the money.Alright, for everyone else that wants details…I have been wanting one of these for a while now, but couldn’t part with $250-$400 for the ones I saw everyone else buying. I found this one while watching a random YouTube video. Looked ok and figured for the price, I would give it a shot. Let’s just say, I have NOT been disappointed. This desoldering vacuum has done everything I have asked of it. I usually use the plunger desoldering pump and desoldering braid. This unit makes short work of desoldering components. The basics operation is as follows:1. Let it warm up (it won’t vacuum until it’s heated to your preset temperature).2. Place the tip onto the solder side of the PCB of the component you want to remove.3. Hold until the solder melts.4. Pull the trigger and let the vacuum do its thing.That’s it in a nutshell. The vacuum isn’t timed, so it will vacuum as long as you keep the trigger pulled. It will remove a good deal of solder before the tip cools enough that the solder stops flowing, at which point, you simply remove the tip and let it reheat a bit. I have removed copious amounts of solder in one pull.The unit was packaged well. Included in the box was cleaning tools and some spare tips, filters, and misc. items.Tip cleaning:You will have to occasionally clean the tip to remove any buildup. You will know cleaning is necessary when it no longer sucks up solder. There are 2 different size tip cleaners, one small and one large. Make sure the unit is preheated and then insert the small one into the tip. Push slowly to remove any clogging, then finish with the large.Vacuum gun cleaning:The vacuum gun has a spring inside to catch the removed solder. Over time, this spring will accumulate solder and require cleaning. To clean, press the tab at the back of the gun. This allows the glass tube to be removed. Inside the tube is a rubber plug, gauze type fine filter, thin black coarse filter, solder capture spring, and a front rubber plug with a small tube. To remove the internal components, simply remove the rubber plugs. The instruction manual has a breakdown of the assembly if you forget how it goes together. I am only going to concentrate on spring cleaning here, because the other parts aren’t serviceable, only replaceable when past their service life. To clean the spring, grasp and hold one end. With your other hand, pull the spring and release, letting it snap back into place. The spring is stainless steel and while some solder may stick to it, the majority will flake off. If you clean it between uses or (depending on how many removals you make each time), you shouldn’t have any issues. I have had massive globs and most would come out. To remove stubborn stuck on solder, I used my soldering iron to heat up the spring and snap it as above. This WILL shoot hot solder, so be prepared with the proper safety equipment and watch the direction in which you aim. I did ruin a spring by trying to over-stretch it and by trying to “unwind” it from the blob… neither of which worked.All in all, after a slight learning curve, I absolutely love this machine. Replacement expendables are available, as well as the complete gun (which I did have to replace because I did something stupid). If you remove components frequently or do kind of electronics repairs, then you need this tool. It is a major step up from plunger type solder suckers, desoldering bulbs, and desoldering bulb type desoldering irons. Through-hole insert desoldering is where this machine shines. The plunger type has a finite amount of suction and I often needed to do the process 2, 3, 4 times before I could remove enough solder to remove the component. With this unit, the vacuum pulls as long as you keep the trigger pulled. Very rarely have I not been able to remove all of the solder in one pull. I am very happy with my purchase and would buy another in a minute if needed. I do a fair amount of desoldering and the time and aggravation it has saved me is well worth the cost. Hope this helps!! Thank you for reading if you got this far.😊

J**S

works great for me

I wish i would have bought this years ago. I started out trying just a plunger deal and my soldering iron, then bought an electric with the plunger built in, that one was 30 watt and it really didn't get hot enough, so I got a 40 watt with a plunger and that really didn't get hot enough and I've used copper braid and that always seemed like a pain in the you know where so i broke down and bought this. As an example I just desoldered 6 caps i marked them and within 10 seconds they were desoldered. I'm pretty shaky but if I had a steady hand I bet I could have got them done in 6 seconds. Just so much easier. Has a mess of extra tips and the filter things inside the tube that collects the solder. I think the tips have .8mm and 1.2 mm but I had a couple bigger caps with thicker leads and I could barely get the largest tip down onto the leads. If that should happen again I'll just enlarge the hole in the tip slightly. Usually I don't think that will happen. I think it heats up pretty quick. I usually turn it on, mark the solder pads I need to desolder, double check and triple check (mistakes are easier to avoid than to correct) and by then it beeps telling me it's up to temp. Put it on the spot and pull the trigger for vacuum and it's desoldered. Literally one second, may even be quicker if you have a steady hand. For soldering I even built a fixture to hold my iron steady. Mine I guess is the older model? It's only desoldering, i thought there is a newer one with a soldering gun also but mines only the desoldering. I've probably used it 10 times or so so hopefully it will hold up. It's a fairly heavy unit, i was expecting some sort of lightweight cheap thing but this is pretty heavy and looks to be built extremely well. If you do any desoldering more than just a few spots this thing is really what you need. Just saves so much time but for me it's more about avoiding frustration.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
1483 Lei

Duties & taxes incl.

Romaniastore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Yihua 948 Standard Desoldering Station 80w With Auto Shutoff Variable | Desertcart Romania