Enterpark DA61-06796A (3 Pieces) Clip Drain Compatible with DA61-06796A, AP5579885, 2683163…

Installed this in my Samsung refrigerator almost 2 months ago. Very easy application with defrosting taking quite some time. Have always had serious ice issues with this frig forming on the back and pudding under the pull out tray that became sheets of ice. Ever since installing this inexpensive fix, no ice. It actually works!

I found this little gem to replace the little tiny factory flawed design clip drain that was causing our Samsung from defrosting. It got so bad the entire condensing coils were frozen over causing the plastic back panel to pop out and freezing over the fan causing it to stop spinning and therefore failing to cool the fridge. I called an appliance repair company to come over to look at it. He told me the two condensing motors had gone out and gave me a $750 estimate to replace the motors. The estimate drove me to do some research online and found that it was the clip drain that is the culprit. So I ordered the clip and also a motor suspecting the motor may have burnt out from the ice build up. After defrosting the entire unit for a day and using a hair dryer to help defrost the rest of the ice build up behind the panel, it was a simple unclip the old and clip on this little gem. I also replaced the motor and put it all back together without a hitch. It's been over a month now and our fridge is running perfectly. I highly recommend this product to anyone having this same issue.

I just watched a few YouTube videos on installation. If you're having iced up areas in your fridge this is what you need to replace in the Samsung Series I had. The hardest part is you need to defrost the refrigerator for several days before taking it apart. Other than that it's just removing a few things. Simple.

The problem is that Samsung designed a serious flaw in ice build up. It tooks hours to defrost, disassemble and reassemble.This product, with more surface area, to heat the drain is a good idea. With three times the surface area, it has the best chance, given Samsungs limitations.If you are a DIY if is worth a try, but this was the lasty Samsung I will buy.

20009 Samsung RF265, for proficient DIY NOT BAD,watch video at least 2x, if u want to do on Saturday morning have a large cool box and about 3 bags of ice, a small cool box for you fresh foods and ice from your ice maker, a Bissell steamer to clear the ice from coils or you will break the insulated Styrofoam don't Rush, only 4 screws to remove fridge panel we are talking upper fridge not frozen section must remove 2 wire clips 2wire and 4 wire be gentle wires are small, when housing is removed drain tube at center will need thawing, use Bissell with angle tip takes a while to thaw tube, it will fell like no tube there ,then pour some water in, you will here water run in lower tray your done, tabs hanging down on new part need to be bent upwards for atight fit, you just saved a bunch of$ even if u bought a streamer if u are not use to DIY take pictures and take time will need patience

Can't believe something so simple solved my ongoing frozen drain line problem, but it did! Took me about 30 minutes to install it in the frig. I had to make a few minor tweaks with my pliers to make sure it was a sung fit on the defrost element but that was easy. It's clear to see that Kenmore should have included something like this from the start and they did add it to the later models. Worked on a 2004 Kenmore refrigerator model 106.74202400

This is a fix to the defective Samsung refrigerator however it did not work in fact it freezes the food even more so now. I've tried to fix this refrigerator because it is a good one but it raises all of my food and it's now become not worth it.

Purchased this on a recommendation that it would help my Samsung fridge from freezing up. After a few day defrost, a good cleaning and install… I am so happy to say this solved the issues so far! 10/10 recommend!UPDATE-Item was easy to install but since installation I have had to thaw my fridge twice. Was really hoping this would resolve my freeze up issues :(