iJDMTOY 8-Pin LM449 81980-50030 066500-4650 Electronic LED Flasher Assy Relay Fix Compatible with Lexus Scion or Toyota LED Turn Signal Light Bulbs

Worked on my FZ09 sloved my problem thanks

I didn't have any fitment issues on my old school WRX because the OEM flasher relay isn't plugged into the fuse panel but instead mounts on a bracket under the dashboard (lower dash must be removed for access).The iJDMTOY relay doesn't mount to the factory bracket but can be secured with a zip tie, if desired. For now, I left it tucked out of the way with another factory wiring harness in case I decide to fine tune the speed of the flasher unit.Adjustment of turn signal speed is a breeze by turning the knob on the unit. It only took a few seconds to verify that the flash rate was where I wanted it (close to OEM) and that my turn signal bulbs were working properly at all four corners.If your vehicle doesn't plug the OEM flasher relay into the fuse panel and the larger size of the iJDMTOY unit doesn't matter, then this is an easy fix for the 'hyperflash' condition when swapping out the factory-type of incandescent/halogen bulbs for brighter LEDs.I will update if this unit suffers problems or a shorter than expected life.

Excellent

If you have a Ford F150 getting to the relay block is a pain. It's way up under the dash to the right of the steering column. Check out some You Tube videos before you do this.

Works exactly as advertised. Will not fit in the socket of the Honda Element. But you can easy make an adapter with some connectors and short cables and use zip ties to secure it.Flash is adjustable and clicking is not too loud.So if you don't mind investing 20 min to make three adapter cables, you will safe a lot of money.

The retainer clips were a lot longer than the original flasher, so I had to cut them off flush to the socket. After that, It plugged into the socket without any issues and works exactly as the original one.