Headwind Consumer Products Raise ITS Furniture Risers Bed Risers Desk Risers, Clear 1"x4"x4" (8 Count)

Though I teased my Mom about using the space under her bed for storage of things that she has too many of (shoes,) I decided to surprise her with raising her bed, with some sort of device that she had heard about from my brother.Being handy in the wood shop, I considered making a set of 4 or 6 very basic wooden blocks, like many of the existing products that I had seen while searching Amazon. When I ran across the "Raise Its," I was immediately drawn to them as they are clear, and practically invisible. This immediately solved my problem of what type of wood I was going to use and the quandary over stain to use to match my Mom's existing bedroom decor.Two days later, I was installing these 4 neat little see-through blocks under my Mom's bed frame. To be such a simple device, the Raise Its are well designed and well thought out, feature packed, contraptions. Not only are they stack-able, but they also came with little anti-slip thingies, and they even have an indent for the bed frame wheels to properly be seated in a stationary manner.The best thing that ever could have been inside the pack was the seventh and eight block. I had not anticipated that the bed's headboard needed to be supported as well.This is a well thought out package in my opinion, especially considering the fact that most of the others, with their bodacious designs, were more expensive and came in sets of only 4.So not only did the Raise Its meet my technical requirements of being low profile, both physically and by design, my Mom was more than impressed. She probably needs only 3 or 4 more King sized beds to hide the rest of her shoes!Thanks Raise Its!!!

GREAT PRODUCT AT A GREAT PRICE!!!I had been looking for the right way to slightly raise my bed to allow "Under-Bed Storage Boxes" to fit. I checked out many that were far more expensive, ugly, and not nearly as solid or as stable.These "Raise-Its" are molded with a depression in the top center that is ideally shaped and suited for seating and immobolizing the wide casters that are used on most modern bedframes. However, even if you have wide circular "feet" on the bottom of your bedframe posts instead of casters, they are more than wide enough to accommodate them. I only needed to raise my bed height one inch and these worked great. Because they are so rigid and interlock securely when stacked, they were very solid... so much so that I'm sure they would be equally solid even if you needed to stack them three deep, which is the maximum the manufacturer suggests.In addition to being ideally designed for bed casters, posts, or legs, they are made of truly CLEAR plastic that is as attractive as possible. This was important because my bedframe casters were almost even with the bedframe edge and, since the bedskirt now no longer quite reaches the floor (after raising the bed an inch), the risers can be seen. Carpeting was still clearly visible through the risers almost as if they were not there at all.THESE "RAISE-ITS" SEEM TO BE THE BEST POSSIBLE PRODUCT FOR THE INTENDED PURPOSE, AND ARE PRICED RIGHT AS WELL - EXCELLENT VALUE!!!

I bought these about six years ago to add some storage space under our guest room bed. The room was also my craft room so I needed the extra space for all my fabric and other crafting goodies. The risers worked great. I only needed to raise the bed up a little bit to fit my storage containers so I only needed to use one riser on each corner. The bedframe was on casters but they were stable on these risers, which I was worried about. We never had any issues with the bed sliding around on the risers during the years it was up on these risers. The risers themselves didn’t slip either - they stayed in place well on our hardwood bedroom floors. They held the weight of the bed just fine. It was a full bed and we didn’t notice any cracking. We have moved since then, and we got rid of the guest bed, but I’ve been looking for my risers recently because our bed in the master bedroom sits really low and I’ve been wanting to store vacuum sealed bags of winter clothes/blankets underneath it but there isn’t even enough height even for small things like that. I think I lost my risers in the move, so I’m thinking about buying another set since I was so happy with the last ones.

My desk at work was a bit too low for me to use my DeskCycle. I got these hoping to make enough clearance to cycle but not so much that my chin rested next to my keyboard. So far, they have worked great. My desk is no light weight, ergonomic affair. It is a heavy duty solid slab of wood. Add thirty pounds of files, ten pounds pens that no longer work, two monitors, a phone the size of Texas, some paperclips, and a 32 ounce coffee and we’re talking a lot of weight. These support it like a champ and there’s no teetering whatsoever despite sitting on carpet and being stacked two high. I can say these Raise-Its did exactly what they’re advertised to do.

I tried 2 other products before I found this one. The others were too tall, bulky, and ugly for use in the living room. I just needed something that would raise the couch and love seat up so that my NEATO robot vacuum (which is also awesome) could make it all the way under and out the other side. I only needed to raise them about an inch and I wanted something that was as un-noticeable as possible. These Raise Its did the job! I ordered only one box, which is 8 pieces. I put the risers with the non-slip on the back legs of the couch and love seat to prevent slipping on the hardwood floor and the risers without the non-slip on the front legs since they are on the rug that reaches part way under the fronts of both furniture pieces. Looks great and no more having to rescue the robot vacuum! I'm very impressed. I wish the profile was just a tad bit smaller, maybe a round shape instead of a square shape, but that's just a product enhancement recommendation for the manufacturer. I am so happy that I found a solution that is both functional and aesthetically pleasing.

These work great. I had the one piece kind, with the angled sides. They don't hold as much weight. And as I discovered one frisky Sunday morning, they don't hold up to much movement. The castor punched right through!These ones are way more robust and have a much higher weight rating. And they just seem more stable overall. I definitely recommend them.

does what it says on the box, brilliant

Need to raise the bed 2" in our spare room to accommodate the bed skirt. Worked perfectly!Bear in mind these will only work on 4 legs, there are only 4 lower risers and 4 upper risers, the lowers have a non skied pad the uppers do not have the skid pad.

I like the stability of these Raise its, and that they work well on carpet. However, they stick out quite a bit from under my couch, so we often stub our toes in them. I wish they had a version with about half the width of these, for small furniture legs. One downside (may be a plus for some) is that it is very hard to move the furniture even an inch with these on, especially on carpets. They are stuck in the carpet, and pulling out the couch (or bed) means it falls off the Raise it, which means that you have to set them up again. This is not so easy to do, especially at the back of the couch/bed if you have other furniture around it.

ベッドの下、テレビ台の下にルンバを通らせるべく購入しました。安定して上げることができ、大きい不満はありません。今後購入される方に、注意点です。・思ったよりも大きいルンバが通れるはずの場所が狭くなり、入れなくなりました。また、見た目もかなりインパクトがあります。・滑り止めが半分しかついていないゴムの滑り止めが付属しますが、個数の半数しか付属していません。全ての足につけたい場合は注意が必要です。