Pickup Roller Kit CC430-67901 RM1-4426 RM1-4425 Compatible with HP CM1312 CM2320 CP2025 CP1215 CP1515 CP1518 CM1415 CP1525 Pro 200 M251 MF8050 MF8350 8380 LBP5280

it worked for my HP laser jet with cheap price

I was impressed with this transaction from start to finish.They had the correct parts for my laser printer at a great price and they beat the delivery date by 24 hours.The parts were better quality than the original ones I replaced.I am completely satisfied!

Once I figured out how to release the roller, removal and replacement was easy. This roller replacement saved me from buying another laser printer!

Works good on the test pages after replacement. Will update if I have any issues. A little more difficult to install on the CP1215. You need to remove paper tray and cover the tray sensor (black square cutout in bottom rear right of printer) with electric tape. Then hold the resume button, turn on the printer, and continue holding the resume button for approximately 40 seconds. The pickup roller will turn to replacement position. Pull the two white clips apart and pull out the pickup roller. Just push the new one in until it clicks. It took a couple of power cycles to get it to rotate out of replacement position. It wouldn't rotate back while on it's side, but as soon as I laid it flat, it did. The separation roller has a piece that is clipped in covering it, remove that and the separation roller pops right out.

First, this 100% fixed the problem that my M451dn was misfeeding about half the time. Good product.Second, the install is more difficult than YouTube makes it seem. Doesn't require much strength, but it takes a lot of fiddling around to get the old rollers out and new rollers in.Here's free advice:(1) Watch the YouTube videos *carefully*.(2) Set up good illumination of the rollers in the printer.(3) Work on your inner harmony and patience.(4) Try to notice *exactly* what finally works in removing the old parts. Not much force is required when the parts are properly aligned.(5) Installing the new pieces is the exact reverse of removing the old parts (which is why it's important to notice how the old parts came out. Not much force is required when the parts are properly aligned.(6) Go have a couple of beers or glasses of wine to regain your inner harmony.(7) Enjoy having a working printer at a tiny fraction of the cost of buying a new one.MORE ADVICE:It appears that this roller may be almost microscopically too small in diameter, which in my machine caused repeated "cleaning" and then "misprint" events. There are a couple of ways to solve this problem, but the easiest way is to go into whatever control panel you have for the printer and force it to use "Media: Heavy 111-130g. That will slightly slow down the printer, which will fix the problem (or, at least, it did for me). A more difficult fix involves inserting a few layers of trimmed electrical tape under the rubber on the pickup roller. This slightly increases the effective diameter of the roller. If you google you can find a blog post describing this. I haven't tried it yet.

Fixed my constant paper jam errors that were due to the printer not picking up the paper. I am so happy too because it saved me hundreds of dollars because my color laser printer was perfectly fine other than this little problem.

these two rollers fixed my paper jam from the feeder tray rolling to the back of the printer. beware you have to enter the secret "2ndary service" menu and select change rollers for the roller to be properly accessible. you can find videos on YouTube on how to enter the secondary service menu for changing rollers. first time doing it and it took me about 20 minutes. someone that knows what they're doing it probably only takes 5 minutes or less.

It clipped right in looks the way it's supposed to but it's not picking up paper