Instructions:1. Unscrew the spring depth pipeline2. When faced obstruction or corner, spring can not move forward, tighten the screws. Then press down firmly while rotating the handle clockwise until the blockage removed or through the corner.3. The dredge and spring back pull, pull, such as not moving counter-clockwise rotation of the handle. Note:1.Applicable for household small straight pipes of diameter 20-75mm,and "S" or "L"pipes of diameter more than 50mm2.After using, please wash clean, dry to prevent rust otherwise affect the next using3.During using, do not use excessive force, when stuck please rotates counterclockwise wire ,pull up and down in order to return to normal state4.When releasing The screw rotation switch,rope do not toward people5.Because the housing is separated from the wire,when the wire goes into pipe with about 3-4 meters, be sure to tighten the screws to prevent the steel wire falling into pipeUsage:Step 1: Loosen the screws, the spring inserted into the pipe. Step 2: When faced obstruction or bend the spring can not move forward, tighten the screws.Step 3: Press down firmly while rotating clockwise cranks, or until the clog by removing the corner.Step 4: the spring and dredge pulled back (if they encounter corner, asked the operating steps 2 and 3) if the draft does not move, the handle can be rotated counterclockwise.
Trustpilot
1 week ago
1 week ago
