2.8-12mm 1/2.5" HD 3MP F1.4 CCTV Video Vari-Focal Zoom Lens for CCTV Security Camera

I got my cover back on, but it left a little gap around it. Everything still works, including the night mode and IR LEDs and sensors. Easy to focus.UPDATE June 2021:Pro Tip: You do not have to take the whole WyzeCam apart to install this lens! After doing a few of these, I found this super simple way to do it.1) On the front of the cam, you'll notice between the original lens and the black plastic surround, there's a rubber gasket there.2) Insert slotted screw driver between the lens and the black plastic surround. You'll need to push the rubber gasket in. Don't worry, just go slow and steady.3) Pry the black plastic piece off using the original lens as a lever. It'll pop right out.4) Use a pair of pliers to unscrew the original lens. It is glued in, so it will take some force. I've done this a few times and never lost a camera doing it. I did lose a camera by disassembling one, when the ribbon cables frayed, so in my experience, it's safer to keep the cam intact and force the lens to unscrew by breaking the glue with a bit of strength.5) Screw in the new Xenocam lens. If you screw it in until the set screw for the zoom touches the white case, it'll be almost perfect. Depending on the range of view, you might need to remove the first set screw and continue screwing it in.It sounds kind of scary, but it's pretty easy once you gain the confidence to use a little force. The improvement in image quality is amazing. I'm using half a dozen or so right now and loving every minute of it.

very sharp lens ! A real good value. also able to lock the zoom and focus with the little thumb screw.

This was a perfect fit for akaso ek7000. Be prepared, that of lens is really glued in there, I used a flat micro screwdriver,( occasionally heated with a cigarette lighter) to chip away the old glue.Nice save for a scratched lens

I recently purchased the Xenocam 6-60mm 1/3" CS Lens CCTV Lens IR F1.6 with Manual Zoom and Manual Iris for my CCTV CCD Camera, and overall, I am very impressed with its performance.The lens offers a wide range of zoom from 6-60mm, providing excellent versatility for various surveillance needs. The manual zoom and iris controls allow for precise adjustments, enabling me to capture clear and detailed images in different lighting conditions. The IR capability is a significant bonus, ensuring high-quality night vision performance.The build quality of the lens is solid, and it feels durable and well-constructed. The image clarity is superb, with sharp and vivid details that greatly enhance the overall security footage quality.However, my only complaint is with the focus adjustment. Minor adjustments make a significant change in the focus, which can make it challenging to achieve the perfect focus quickly. Despite this minor issue, once the focus is set, the lens performs exceptionally well.In summary, the Xenocam 6-60mm CS Lens is a high-performing and versatile lens for CCTV cameras. Despite the sensitivity of the focus adjustment, its excellent image quality, manual control options, and sturdy build make it a valuable addition to any surveillance setup. I would highly recommend it to others looking for a reliable CCTV lens.

lens works fine but scratches too easily. can't we make the lens out of same glass a smart phone is made from

Takes some trial and error but it turned my Wyze Cam v4 into super versatile camera!

I bought this to upgrade a Wyze Camera V2, installation was easy. It was much harder to remove the old lens than it was to just screw this in. Picture quality is great! Adjustable zoom is a very good value for the price when considering other similar options. I only wish I had bought something with a greater zoom but this works for the purpose I need.

fits the raspberry pi HQ camera module well. Allows for focus from just a few mm to infinity. not the highest quality lens but not bad either, and allows me to use a zoom type focus rather than wide angle for certain applications.