Aquarium Air Pump with Aluminum Housing, Commercial Air Pump with 6-Outlet Air Manifold, Pond Aerator Fish Tank Bubbler for Aquarium, Pond, Hydroponics (650GPH-20W)

The FUMAK Aquarium Air Pump with Aluminum Housing is a standout product that has exceeded my expectations. Its commercial-grade design and robust aluminum housing are immediately noticeable, providing a sense of durability and quality that you don't find in many other pumps. The construction feels solid and built to last. The 6-outlet air manifold is a fantastic feature, allowing me to easily power multiple airstones and filters from a single, centralized unit. The air pressure is consistent and powerful, ensuring excellent oxygenation for my entire tank setup. The pump also runs quieter than I anticipated for its size and output, which is a great bonus. This is a top-tier air pump that is perfect for anyone with a large aquarium or multiple tanks. It is a reliable, high-performance, and well-built product that is definitely worth the investment.

Needed a new air pump for my two aquariums. Wanted a pump that delivers a high volume of air, and saw the pump has six air outlets. So, it was a no brainer to get all the volume of air I could use. The noise level is not whisper quiet. However, it's still quiet relatively, for a piston pump. But, unless you're looking for a White Noise producer, this pump would be better off outside the bedroom, as the humming could be bothersome. My set up is in my indoor Arboretum, so the humming is not a problem. The pump, for the noise level, produces the air, lots of it. I run four airstones off of the pump, and my tanks are well ariated. Probably would have no problem using the remaining two valves. I put my pump I a hanging basket to keep it well above the levels of the tanks. That reduced the noise level slightly. The pump does produce a slight amount of warmth. I can handle the pump with bare hands, no gloves needed. This is a very good, high volume air pump. Other than the noise level, which can be tolerated, if you make provisions for the noise, this pump is exactly what my fish needed. A good value for a powerful, high volume air pump. I gave the pump Five Stars on everything, except for the noise, which I gave a Three Star rating. If you can tolerate, or plan for the noise level this is a great air pump.

Works great, strong air flow

I'm very happy with this pump so far, have had it running for about a week and it's worked well. It is a little louder than a standard aquarium air pump but the volume of air this thing pushes is crazy.

I own both the 20W and 30W models of these air pumps, and this review covers both. TL;DR: These are powerful piston-style pumps that offer excellent performance for large or deep tanks, but they're louder than high-end aquarium pumps. If you need the airflow, they're a great value. Noise: The Elephant in the Room Other reviewers seem divided about noise levels. Since I have two different sizes, I can answer "is this loud?" with a very confident "it depends." Both pumps, especially the 30W model, have a noticeable break-in period. For the first few hours, my 30W pump was violently bouncing around and quite loud. Both quieted down within a week, but neither is truly quiet. Using my phone's decibel meter, they produce about 47-50dB in rooms with 30dB noise floors. For reference, 50dB is roughly as loud as an inexpensive dishwasher, a TV on for background noise, or a quiet conversation. I run my bedroom white noise machine at about 53dB. DIY Noise Reduction Tip: Attach 5-10 feet of 3/8" hose to the intake port and let it coil up—this functions as a muffler and shifts the noise frequency higher (from about 200Hz to around 700Hz), making it less intrusive. Placing the pump on foam also helps dampen vibrations, as neither model is heavy enough to dampen itself. Airflow: Surprisingly Powerful The 20W model generates enough air to power four 4" diameter "ultra fine bubble" air discs in an 18" deep tank at full performance, but that's running wide open with little reserve. The 30W is noticeably more powerful—about 50% more airflow. Both are overkill for most hobbyists with standard tanks. You really only need this kind of power with large, deep tanks (like my 8ft long, 18" deep 165-gallon and 36" deep 55-gallon stock tank) or if you're running an actual fish room. I'd estimate you could run at least 18 undergravel filter uplift tubes with the 20W pump. Heat: Warm but Not Problematic My FLIR camera shows maximum temperatures of about 40°C (104°F) for the 20W and 50°C (122°F) for the 30W in a 19°C (68°F) room. This is warm but not excessive—remember, these pumps compress air, which generates heat. Neither gets burning hot, and they'll be fine so long as they're not in an enclosed cabinet or something, Power Consumption: Less Than Advertised Without diving too deep into electrical specifics, these pumps use less power than their ratings suggest. The 20W model uses about 11 actual watts, and the 30W uses about 18 watts. The seller is likely referring to apparent power (volt-amps) with their power ratings, not actual consumption. For most home users in the US who are billed on actual power, consider these as 10W and 20W pumps respectively. Quality and Reliability Unlike most aquarium pumps which use diaphragms, these are actual piston pumps—think of them as small, high-flow, low-pressure air compressors. This explains the break-in period, especially noticeable with the 30W model. This type of pump experiences more wear than diaphragm pumps but also performs better—no diaphragm pump I know of matches their pressure or flow. I haven't owned them long enough to speak to long-term durability yet, but being inexpensive and somewhat generic (sold under multiple brands), I'd expect 2-5 years of service. Safety Note I'm not entirely comfortable with what appears to be an exposed laminated motor winding core or metal body on a device without a three-prong plug. I suggest running them on a GFCI-protected outlet, which is good practice for all aquarium equipment anyway. Design Flaw My only real complaint is that the intake barb isn't long enough to fully seat a 3/8" hose because it interferes with the round air filter housing. You need to cut the hose at an angle to make it fit securely—a simple design fix that should have been addressed. Overall Recommendation If you need serious air movement for large or deep tanks, these pumps deliver excellent performance at a reasonable price point. For standard aquariums, they're excessive and you'd be better served by a quieter name-brand pump from Danner, Tetra, or Fluval. Assuming they last 4+ years, these are a solid value for their performance class. If you need this kind of performance, these move impressive air volume without being unreasonably loud for their capability.

Very nice pump strong flow with multiple functions up to 6 different applications. Easy to install, not very loud. Is in my garage, noise doesn’t matter anyway

Absolute garbage 6 outlet pump will not run 3 airstones. Do not buy this pump it's a complete waste of money. I left in the box unopened till I set up fish room and what a disappointment.

I recently had purchased my fourth pump from these guys I absolutely love them these products are phenomenal I had an issue with my fourth pump though the first couple days it started cutting in and out on power maybe five or six days into it not even the pump quit working completely leaving my plants overnight with no oxygen which is any plant lover knows will put you into a panic not only did the company replace my pump free of charge I don't have to pay to have it shipped back for the old one they had it to me in under 48 hours customer service is second to none I would recommend this company to everyone as loud as I can and after going back and reading this I realized it sounds like I got paid for this but I swear I didn't great product

Works well, it's powerful. Only downside is that it's a little bit noisy, so I put it in the closet and it's much better.

Muy bueno lo ocupo en una cortadora de co2

Bueno

Amazing very small air pump with attachments for multiple lines. I can brew worms castings tea in 3 different baskets for 3 days sometime and it does not over heat. It is louder than most and it vibrates like hell. I put it in styrofoam box with open lid for air intake. BACKFLOW PREVENTORS ARE MUST FOR EACH LINE OR IT WILL DIE RIGHT AWAY . You can rotate air intake valve to 3 positions. PLEASE BUY AIR STONES AND A LINE. Yes everything needs to be purchased separately but you would need a longer tubing anyway and air stones and backflow cost $5 so it's cheap. I wish I bought a bigger unit too.

Maneja buen volumen de aire pero se calienta mucho,hay que agregarle un ventilador de computadora y CONSUME MUCHISIMA CORRIENTE, pagaba $300 de luz y trabajando 12 hrs diarias me subió a $957 para que lo tomen en cuenta .