(Camera Junction Box) Metal Aluminum Mount Bracket, Universal for Bullet Security Camera, Waterproof Hide Cable Junction Box Compatible with Solar Panel, Fits Wall Ceiling (4 packs)

I bought these to mount my reolink D500 and B500 cameras. I had considered the cheaper plastic boxes and briefly looked at Reolink's own offering which we way over priced at £30! (More than half the cost of the camera!?). These seemed like a good compromise and the TLDR is i'm very happy with them. I've read some reviews that note that they are not compatible with the Reolink D500 dome camera but they had been made to fit, so i was prepared to make some adjustments before buying. The B500 camera fitted without any issues as the camera baseplate holes lined up perfectly with one set of the many (threaded and sealed) hole patterns in the junction box lid. For the D500 dome cameras, I placed the mounting template supplied with the camera on the junction box lid and transferred the widest hole pattern from the junction box lid to the template, then to the camera base plate. Drilling a new hole pattern in the plastic camera base plate was much easier than drilling the aluminium junction box lid (as some have suggested). There's plenty of room inside the junction box to take the POE RJ45 connector and the additional power connector and reset button fitted to the Reolink camera tail. The lid is sealed with a rubber gasket. There are also 'O' rings supplied to seal the screws. Rubber grommets are supplied to seal the cable entry ports. Overall, a great quality, well thought out junction box, which is certainly better engineered that the cameras that i fitted to them (the Reolink D500 base plate is very poorly designed in comparison to these boxes!). Highly recommended.

These were perfect for my Reolink cameras, coming in much cheaper than Reolink's own junction box and appeared to be smaller. It took a bit of jiggling round to find a set of holes for my cameras (RLC-410), but I got there in the end.The boxes are solid and fit together very nicely with no gaps. The wall plugs are fairly poor quality, but that can be said of almost all wall plugs I find bundled with wall-mounted items. It's cheap enough to go out and get some better ones, and the screws are perfectly serviceable.I think the rubber plug through which the camera cable is presumably meant to be routed could be improved by having a cut across its radius. The hole is so small that there was no chance of threading the Reolink cables through. That being said with the cameras installed and with a little bit of sealant for extra protection, there's no chance of water ever finding its way through so it's not a problem.

I wasn't going to pay £28 for Reolink's over-sized, over-priced junction boxes. These were ideal for size and better priced at around £12.50 each (4 pack). They are well made (aluminium/ pot metal) with silicone gaskets.The existing junction box mounting holes don't fit Reolink's camera base plate, however. But you can easily modify the camera base plate by drilling four holes to align with the '5 position' on the junction box. Either do a paper template or measure them and drill slightly over-sized holes for some wiggle room.These boxes are around 104mm diameter (I think the Reolink one's are 120mm) so marry up with the camera's base plate (105mm) for a much neater fit. It's just a shame the junction box manufacturer didn't add threaded holes to match Reolink, but it's a simple job to modify.

Bought this product for the installation of my reolink camera and this product didn’t disappoint. The quality is second to none, robust and felt like it will stand the test of time. the seal will surely protect the wiring inside the box, the placement of the screw holes to secure the camera in the box was very good and accessible. would recommend this product for any of your cctv camera installation

It's a good junction box, very solid, sealed with few option to run a cable. 3x stars for mounting side - bolts provided to mount camera are very short (little tiny ones) and can't hold my cameras - i had to use a different ones.

I used these boxes to fit with Reolink dome cameras. However the holes didn't line up so I simply drilled the Reolink bases to match with a set of holes on this box. Once done it worked fine.I'm sure they work for other brands with no problem. Sturdy and well made. Better than Reolink D20 units which are too big and are ugly as a result.

Perfect fit

Procured this for an outdoor Reolink 4K bullet camera where i needed to hide all the cables that are fixed into the camera outside and not inside the building. As you expect these cables have exposed ends so are NOT IP rated so need protecting from the elements, only other option is to drill a huge hole to fit all the cables/wide ends through. It does a fine job after you have spent 20 minutes trying to find 3 holes that all line up with the camera mount holes.. VERY snug inside but managed to get all the cables inside and the RJ45 cable through the wall and into the box, mounting on the wall was very easy, whole process took about 25 minutes to fit and mount. only negative is it would be fantastic if this was offered in black to match the camera i have and it isnt clear in the picture/description but the box is made of of metal with rubber seals not cheap plastic so will take the weight of the camera and last for many years