Pro Tie 33732-6 T-Bolt All Stainless Hose Clamp, Range 2-1/2" To 2-13/16", 6 Pack,

They work great on my radiator hoses.

Pro Tie 33734 T-Bolt All Stainless Hose Clamp, SAE Size 84, with this, a Pro Tie 33733 T-bolt All Stainless hose clamp SAE Size 72 and 6 inches of 3" silicone tube mounted to a A'PEXi 500A026 and my MAF on my 2011 VW GTI. I used the extra length on this bolt to attach to my mount for this short ram intake. This setup sits right in behind the gap left in the grill for the intake using the bolt pulled from the stock airbox as an attachment point to the vehicle and the other end mounted to this clamp's extended bolt once the clamp was tightened. Looks clean with these clamps. More clean than most of the professional kits with their average clamps.By far the gold standard if form and function both matter.

For some reason this is a hard size to find.They were the correct size they did the job. One more word!!

I replaced the exhaust on my new Ducati Monster 1200S and in doing so I damaged the T-bolt clamp. To be honest, I think that after the builders at Ducati install the exhaust they crush the t-nut so it can't be removed without destroying the clamp. My suggestion? Buy this one rather than ordering one through your Ducati dealer. This was a few bucks while the once from Ducati was $26. I guess shipping from Italy accounts for some of the overhead but $22 worth? To be honest they aren't identical, this one actually seems beefier. Anyway, order one BEFORE you remove your exhaust cans!

This clamp's maximum diameter is 3 and 3/16 inches, not the 3 and 13/16 in the product description. Even the package says 3 and 3/16". Please change the product description. I need 3 1/2 inches so I have to look for another to buy.

I have learned to dislike the standard hose clamps that you can buy at the local big box stores and had been searching for a reasonably priced, high quality hose clamp. These clamps have fit the bill for those applications that I really need to insure that they get a firm grip and keep the pieces clamped together.

Great Product. Used it to mount my Mutazu generic bat wing fairing to my VN2000 Kawasaki Motorcycle. Worked great using some glue backed insulating close cell weather stripping as a dampener. Bolt served as a mount and off I went. Make sure that you have the right diameter range as the weather stripping can be compressed a great deal.

works perfect, unfortunately, the range on this was just a bit too tight for my project and I had to order a few more sized up to complete it. Worked well for a 3" CAI conversion on a MK6 GTI on the filter side, would not fit on the stock MAF with silicone hose. (SAE 84 ordered to fit MAF side).