WORX WX423.1 85mm 400W Compact Circular Saw Worx Saw

Compact and easy to use. Useful addition to our tool box.

I have the WX427 XL 700W WORXSAW and have read the tales of woe other reviewers have related here. I have only cut wood using the machine and I have only used the wood blade that came in the box. My own experience of this saw is quite positive. This saw is incredibly light weight, the blade is very thin and creates minimal saw dust. I have had very accurate cuts using it. However, like most users I tried to use the saw like I use my 1800W circular saw and indeed I too found the blade wandered from true even when using a straight edge as a guide. At first I thought this was because my hand pushing the saw with the blade at full depth of the work piece through the cut was positioned behind the blade and that the slightest deviation from the straight edge by me would result in an unsatisfactory cut. The blade jammed. In fact the blade did slip on one occasion. I was cutting 18mm birch ply. Whilst the blade is sharp and the machine turns fast, it does not have the same torque as my 1800W circular saw, nor should I expect it to. The vibration feedback will using the machine told me I was pushing it machine or blade beyond its limits cutting this material. I then adjusted my technique. Instead of trying to achieve the cut in one single pass I found I could achieve accurate cuts running the blade depth at half depth using a straight edge as a guide. Allowing the blade to cut without pushing the machine too hard, the forces and vibration acting on the blade and the machine were noticeably less. Running the next pass with the blade just past full depth of the work piece resulted in sharp clean cuts on both the topside and underside of the work requiring very little with a hand plane. Using this technique I have consistently achieved good clean accurate cuts of over 2.4 metre lengths, requiring very little corrective work if any and was able to complete all my cuts through the birch ply to build the sides, doors and drawers for a wardrobe. I have found 1” thick MDF can be cut in a single pass with no issues or defects. When cutting timber like pine shelving boards, again I found no issue. Cutting 2” x 4” framing timber may need the multi-pass approach if the wood is knotty and you are looking for a precise cut. If you try to twist the machine in the cut, the blade will jam. If you nip the blade in the cut between the work piece sides without supporting them properly, the blade will jam. This is after all a 700W machine. I have no particular brand loyalty and pick machines on their merits. This particular saw is very good for light work where a 1800W brute would do more damage than good. Used with a straight edge guide and clamping everything down safely, clean crisp cuts can be achieved consistently. Pay attention to the material you are cutting, plan the cuts properly and with a little time and understanding of the behaviour and performance of the machine which can only come with experience, you can achieve good cuts with this machine. One last thing, I do not rely or have ever used the laser. It was setup in a factory and shipped, then delivered. It is not unreasonable to expect the laser to be out of alignment.

Great tool for accurate and convenient cutting. A laser sight line would make it a 5 star.

Purchased for a specific DIY job, namely cutting through 1/4 inch hardboard laid over (extremely squeaky) floorboards. Unlike a full-size circular saw this was controllable and could be set to precisely cut the overlaid boards without ripping the underlying surface, and it made easy work of restoring damaged skirting boards with somewhat eccentric angles. Used freehand on material in situ (like a vibrating saw - Wilco rather than Worx, but still very effective) I got a neat result with a minimum of mess, noise and foul language. As an Amazon Warehouse deal was available I went for it and so got a substantial reduction (enough pay for the Worx 44 tooth cross-cut blade). The only missing item was a dust extraction adapter (a little piece of plastic tubing intended to bridge the gap between a 20mm diameter extraction port and a 'standard' vacuum cleaner hose, whatever that is) and a printed manual. Since Worx make the manuals available in PDF the lack of instructions wasn't a biggie and if I desperately need to extract the dust some day I suspect a little work with some 20mm hose, a jubilee clip and some duct tape will work as well (if not better). The standard (already fitted) fitted 24 tooth Tungsten Carbide blade cut very cleanly despite having self-evidently been used previously by a previous customer who forgot the cardinal rule of power tools - let the motor do the work - and from the burning and scoring said customer tried to force a full-depth cut through a plank in one go. However that turned out when treated with respect both the blade and power tool did their respective jobs, indicating both are quality items what can stand a little abuse now and then, but If you invest in a precision mini-saw, take my advice: let the machine do the work as forcing the thing will only result in tears before bedtime, where making several cuts at increasing depth takes little extra time but greatly reduces the frustration-factor, not to say acting-out and cussing ocassioned by waiting for the overheat protection circuit to re-set. The only part of the job that required the full-size saw was a pair of matching 45 degree cuts to form an 'outside' mitre joint, something the a small handy tool like this simply isn't built for.

Great saw and added with the multi purpose blade makes it even better. The only thing is it didn't come with the allen key even though the box was sealed but that's just being picky.

Very Happy Thank You

Ottimo, ho tagliato anche muri, ferro, legno. La guida laser fà tanto

Excellent tool, have used it numerous times, easy to hold with one hand. have even purchase extra Blades. ONLY problem, it came with UK power plug, could be my err (maybe I did not stipulate that I need an Australian plug)

Die Säge wurde aus England geliefert und prompt auch mit Stecker für das dortige Stromnetz. Bei einem kurzen Test war der Schnitt mit dem HSS-Batt recht ausgefranzt. Ursache mMn einfach die zu niedrigen Drehzahl in Verbindung mit dem 400 Watt Motörchen. Rückgabe war problemlos

This saw is a convenient and portable option for chopping lengths of wood or smaller branches off trees. Be aware the cut is not very deep, so you'll need something bigger to handle a 4 x 2 (100 x 50mm), and also it's a single blade (I was wanting to replace my dual counter-rotating blade model, but these are quite hard to find at present). This means you have to watch the kickback (be aware of the risk of it leaping out of your hands if you go backwards).