Color:Plating Red(New electroplating design) Name: Interior Car Trim Line Material: High-Gloss Resin Colour: Red Weight: 43g 【Features】: 1,This Section is Used to Personalize the Car Trim Decoration, Interior Trim Decoration is Ideal. 2,Personalized Color Red Interior Trim Enduring, Paste, Solid and Reliable Face and Will Not Damage the Paint, Can be Attached to Any Location Outside the Body. 3,High-Gloss Resin Production for the Car Exterior trim Personality Decoration Moulding Strip Decorative Ideal.Red Car Trim Enduring Personality Pattern Color, Paste. 4,Solid and Reliable Face and Will not Damage the Paint Can be Attached to Any Location Outside the Body. 【Note】 The First Step: The First with a Damp Cloth to Wipe Clean Part You Want to Paste. If Your Car Recently Waxed (Wax or Table Board Wax) Please Wax Clear Before Pasting. Step Two: Heat the molding to 60-70 degrees celsius with a hair dryer for the greaterst flexibility and adhensiveness. Step Three: Press the strip into the position and hold for a short time with your hand. Step Four: Purchase includes a plastic spade as an assistant tool for installation. 【Package includes】1 Bag Car Moulding Strip (5M Long/Bag); 1 x Auxiliary installation scraper.
S**Z
SE VE BIEN, PERO NO ES DE CALIDAD E INCOMODO DE INSTALAR
SE VE BIEN, PERO NO ES DE CALIDAD E INCOMODO DE INSTALAR
C**E
Using this everywhere
Easy to use, adds some flare to an old car
A**N
Es buen producto
Facil de usar
M**L
Cool, but NOT for every car.
I have a 2010 priusPROSThe color on this looks good and rich (I purchased Gold)Comes with a tool to help installThe PriceCONSTrim can be prone to denting, deforming, and stretchingPlacing it between grooves doesn't always hold it firmly (can be quite loose even in tight grooves)Placing the trim around straight edges causes a deformed lookNo instructions or installation tips are included, literally just a blank sealed bagMIXED FEELINGSTool included is very useful, but can easily deform in tight spaces/ continued use.The amount of trim initially seems generous, but If you are trimming Doors, dash, head display, the entire interiormay require around 6-8 units of this product- just a full door trim can require the whole bag!Anchoring trim may easily tear during installation.More or less easy to install, (But can require very careful and tedious installation for a sleek job)Sticks well in some spots, but terribly in othersTool can "Take apart" your cars interior if your a little to roughConclusion:I just installed it, In some areas I can tell it's looser than others. If you wanted to, you could easily rip it all out.I'll try to remember to update in a few months, but I can't imagine it ALL staying in there without warping in the heat, or wear from general car use. Overall Cool buy But if I really was serious, I would pay to have it professionally done.
S**Z
Prepare ur fingertips bcuz it gonna burn. But the finish is out of this world
Difficult to get into the grooves. You'll need some glue for the edges.
W**A
Looks great but installation can be long and painful
Once you get it, it looks really really nice. The installation process is a pain though. It’s very hard to stick it into some places as it doesn’t use adhesion, you have to push it into place. I couldn’t use it everywhere I wanted to in my car for this reason. It is also pretty hard to install around corners or round places. When you cut it, it shows where the endings meet if you put it in a circle shape. Overall though I do love how it looks, I just wish the installation process was easier as it took me about 4 hours.
A**E
Hard to Install, Weird to set up, Great to look at
This stuff stays in, by wedging into the cracks, and whatnot. However, if you drive a 10th Gen Civic, be wary that it will not have many spots on the doors to go. The only places I was really able to get it, were the larger parts of the dash, some parts of the door, and the underlining from the front to back on the sides. I did a test drive and it did come lose in some key spots, do NOT expect it to bend and shape and keep wedged unless you apply some sort of super glue. If you do, I reccomend applying it on the side with the plastics, not the interior fluffs.This is using NO ADHESION, otherwise, locktite would keep it perfectly in place, simply removed with rubbing alcohol or any other glue remover. Otherwise this is a great look combined with black interior cars.
J**N
Fancy but a pain to install
On my 2014 Dodge Ram 1500, Ive been able to get it around the instrument panel. Anywhere else seems like theres not enough wiggle room to allow this in. If you do manage to creep some of this into a gap, the opposite side gap will be pushed closer therefore decreasing your room to install these. For its price its probably worth it on an older vehicle where their was room for custom trim
F**S
Ne gaspiller pas votre argent !
Ce produit ne tient pas dutout, ne gaspiller pas votre argent pour ce produit
Trustpilot
2 days ago
1 week ago