SmartSeal Concrete Floor Sealer - 100ml Sample - Premium Exterior & Interior Concrete Sealer and Dustproofer with Satin Sheen Finish – Easy to Apply, Stain & Water Resistant Sealant

Excellent product really good coverage i gave my garage (9"6 × 18ft) 2 good coats and I reckon i could of done another 2 with what's left leaves a slight sheen to the screed or concrete im very happy with the results and the drying time was exactly as per instructions .mine dried a bit quicker as the weather was warm but I gave it a good 6 hours between coats .

The sealant was applied very easily. I applied two coats. My immediate thoughts are that it has worked very well and I am very pleased with the results. Time will tell to see how it stands up to cars being driven in and out of the garage.

I don't usually bother with Amazon reviews but this stuff is pretty amazing. I had a very very dusty cellar concrete floor that needed shoes and wiping feet every time I went in and out. After 2 coats of this sealant (which is very easy to apply with brush and roller) I can now walk about in the cellar barefoot without treading dust through the rest of my place afterwards. Highly recommended.

Worked a treat on my concrete garage floor. The floor was really dusty and chalky, but after two coats with this, it is now sealed to perfection. Really easy to apply with a roller. Coverage is good, I probably applied it quite generously. Ambient temperature was around 17 degrees, so it dried in no time too. Very pleased and would definitely recommend.

Applied by roller to floor of a summer house and coverage with 2 coats was excellent..

Pretty good floor sealant.

I wanted this to seal my concrete birdbath. The sample size was more than enough for 2 coats and more than half of the sampler remains. It did the job and now my birdbath is sealed. I deducted 1 star as no instructions came with the bottle. Instead they give you the link to their website. But instructions are not clearly visible. After much searching I found a video showing how to seal a wall using the product. The procedure I used follows. Using a small brush I applied the first coat. At this stage it is meant to be absorbed by the concrete. This I left about an hour and it set to give a shiny surface. Then I applied a second sealing coat and 4 hours later I filled the birdbath with water. Job done. I have also bought one litre of the sealant. This was a disaster in terms of opening the container. The cap would not twist off and leaked the sealant over me!!. In the end I had to use a box cutter to cut the cap off. When I screwed the cap back on it leaked again. Be careful the cap on this product. For this reason I am deducting a further star. The sealant works fine.

Does what it says on the tub