Are the aluminum channels non-conductive? most led strips have exposed copper connections on the back. do i need to insulate with mylar tape first?

You are correct. LED flex strips have areas with exposed copper, the aluminum extrusion is not insulated and they can short circuit when there’s no barrier. FYI mylar is a polyester film.. the double sided mounting tape supplied with most strips is adequate to insulate it. If the led strip will be upside down then a 3M VHB automotive mounting tape is less likely to let the led strip peel down. If the proffered plan is to use a glue rather than a tape, then a clear spray on finish can be use to insulate the channel.

My led strip is too bright for my application, even on the lowest setting. any suggestions for reducing light transmittance on these covers?

You can reduce brightness by reducing voltage to the led strip. I do not know your application but a voltage adjustable power supply will work as long as it delivers enough amps to drive the leds. I think one light strip of about 16 feet draws about 6 amps. In a car that produces up to 14.5 volts, a dc to dc reducing power supply would do it. Hook it up and with a volt meter and a small screwdriver turn the potentiometer off the power supply to set voltage to desired light output.

Can these be used for a straight edge for a circular saw?

if you mean as a saw guide, then no. These extrusions are not the sort of thick stiff piece that makes a good rip guide. A piece of steel angle is stiffer than aluminum, either is available from 2' to 8' in length at local home centers and hardware stores. at 3' long even a 1/2x1/2 1/8" thick angle should be stiff enough. At 8' long a 2"x2" 1/8" thick aluminum angle is noticably stiffer than 1-1/2" x 1-1/2" and about as stiff as a 1" square tube with 1/16" wall, but in steel a 3/4" x 3/4" or 1" x 1" angle 1/8 thick is stiffer than any of the largest widely distrubuted aluminum angles.

Color	Silver
Brand	hunhun
Indoor/Outdoor Usage	Indoor
Special Feature	Corded
Light Source Type	LED
Power Source	Hardwired
Light Color	White
Theme	Indoor
Occasion	Christmas
Style	Modern
Material	Aluminum
Controller Type	App Control
Number of Light Sources	12
Included Components	Pack of Ten(10) 1m/3.3ft long segments with Cover, 24pcs end caps(12pcs without hole and 12pcs with hole), 24pcs mounting clips, 48pcs screws(24pcs for woodiness, 24pcs for ceiling), 2pcs extension connector, 1pcs L-shape corner
Item Weight	2.6 Pounds
Number of Items	10
Control Method	App
Seasons	Christmas
UPC	619315206603
Item Length	10 Meters
Form Factor	U Shape
Manufacturer	hunhun
Part Number	CH-01-10
Item Weight	2.6 pounds
Item model number	CH-01-10
Is Discontinued By Manufacturer	No
Size	1 meter
Finish	White
Shape	U-channel
Item Package Quantity	1
Measurement System	Inch
Special Features	Corded
Batteries Included?	No
Batteries Required?	No

hunhun 10-Pack 3.3ft/1Meter U Shape LED Aluminum Channel System with Milky Cover, End Caps and Mounting Clips, Aluminum Profile for LED Strip Light Installations, Very Easy Installation

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions