Silverline Polycarbonate Face Shield – Flip‑Up Clear Visor, Adjustable Headgear for Safety & Eye Protection (140863)

Purchased for my dad for garden trimming jobs. He wears glasses so regular protective goggles can be difficult to wear and even the best ventilated ones tend to steam up rapidly and become useless, or the elasticated headband perishes whilst in storage and so is useless the next time he needs them. This product solves those problems and adds head protection as well. Assembly is quick and simple, but don’t forget to remove the protective film from the clear visor. Fitting the visor can be a bit fiddly, but you won’t need to do so again unless you have to replace the visor at a later date. I suggest removing the protective film AFTER fitting the visor to protect it from scratches during fitting. The product comes with a simple and non-perishable plastic headband with a removable washable sweatband, and adjusts for fit using a simple turn-buckle at the rear which lengthens and shortens the headband. The visor flips up and down easily but that mechanism is also not too loose, so the visor stays in whichever position you require. Unlike simple protective goggles, the visor protects the whole face. Don’t be put off by the cheap price, this is a well-made and well-designed piece of Personal Protective Equipment.

I needed a face protection when I was doing some pressure washing of our path way. It can be adjusted easily and is comfortable to wear. You must take off the protective film on both sides of the face shield to see properly. The one I bought was previously sold but came as new and discounted price, I would recommend this product.

I wear spectacles so impact protection glasses can't easily be worn as I need my varifocal lenses when doing projects and chores. For years I have had some old rubber protective galsses to wear over the top of my specs but they are a pain. Even with these on when using s trimmer or weed whacker I have been hit in the face, mainly cheeks, chin and forehead by fast flying debris which has hurt like a hornet sting. If this had been my eyes, I guess loss of sight would have been a possibility. This new face shield and visor is easy to assemble, seems very well made and will protect my eyes and all of my face. Very easy to flip up and down and optically clear. I shall be using this when I have my yard-work and chores to do. I value what eyesight I have left.

Perfectly good if you don't need a mask. Still using this 8 years later

Excellent Value for your money...the face guard arrived all in good time and is of a good sturdy construction, which is good enough for me, an infrequent DIY enthusiast. The visor has a protective Blue and Clear film on both sides and is easy adjusted to the helmet but be mindful to take the clear film off otherwise it looks frosty....However I think the best feature is the turn dial at the back head guard which allows for a quick and easy adjustment too your head size...They say you get what you pay for....I think you get more than what you pay for with this guard, "Well worth the £6 quid to me anyway".

A cheap and cheerful bit of PPE which served my purpose (cutting stainless bar with angle grinder). It is a pretty flimsy piece of kit which I strongly recommend is not used for protection for heavy duty jobs e.g. when cutting large tiles/slabs - the visor is cheap polycarbonate which easily shatters. Also, to note that the face shield is delivered covered on both sides with poly' film - other reviewers seem to have removed just the one side and then complained about the cloudy visor !

I bought this for protecting my face when using a hedge trimmer. I thought it was a joke when it arrived as the visor was blue and not very transparent! There are actually two pieces of blue film on the front and back that obviously must be peeled off. These are so well placed however you'd struggle to realise it! I've seen other reviewers say the same. Anyway its a great value piece of equipment and is I love the fact that you can put it on your head then twist the knob on the back to tighten it, rather then resize then try putting it on. Also the visor can be slid upwards if you need to temporarily move it (to drink your tea!). It's lightweight and tough, although it does feel a little bit flimsy. Well recommended though for full facial protection.

Seems cheap quality at first but one assembled it works great no more Google's steaming up ...very comfortable too and for the price very good. Just unsure how well the Flexi plastic is but it did stop any chips that hit it.

Ich nutze diesen Schutzschirm beim Drechseln und beim Schleifen der Drechseleisen. Vorneweg: Der Schirm ist glasklar. Er kommt mit ZWEI Schutzfolien, die man natürlich beide vor Montage abziehen sollte. Der Schrim lässt sich wunderbar einstellen und gut eingestellt auch bequem tragen. Endlich muss ich nicht mehr so eine Schutzbrille über meine Lesebrille ziehen. Das war immer lästig. Angenehm ist auch, dass ich den Schirm hochklappen kann, wenn die Maschinen gerade mal aus sind. Auch mir ist aufgefallen, dass der Schirm statisch Schleifstaub anzieht. Aber dafür würde ich keinen Stern abziehen. Kurz abpusten und schon ist die Sicht wieder klar genug. Von meiner Seite eine klare Empfehlung zu diesem Preis.

Buen producto lo uso en mi trabajo, es ligero y lo que mas me gusta es la cinta superior otros modelos no lo trae mejora el agarre

Serviceable

E' una maschera con certificazione DIN EN166 F (con resistenza all'impatto di una sfera di acciaio da 6mm lanciata a circa 160 km/h), questo la rende utilizzabile anche professionalmente nei cantieri e sui luoghi di lavoro per certe applicazioni, e questa è la cosa più importante. La visiera in policarbonato fornita è la classica stretta, tre fori di fissaggio, ma a una decina di euro si trovano anche quelle di ricambio più larghe, a 5 fori, sia in policarbonato che in rete metallica, gli attacchi sono standard (io ho già un paio di Oregon, e sono identiche). Comunque la visiera fornita ha un'ottima trasparenza e pochissime rifrazioni (naturalmente vanno tolte entrambe le plastiche di protezione). Per esperienza non durano molto, è il materiale stesso che non ha resistenza ai graffi, quindi meglio prendere già un ricambio da tenere di scorta. Ma la durata limitata è normale, anche le vecchie Stihl che usavo una ventina di anni fa (e che costavano un rene) dovevano essere cambiare spesso (le visiere, non tutta la maschera). Nessun problema con gli occhiali da vista e con la maschera A1P3 (polveri, vapori organici e gas). Si appanna, d'altronde visto il costo... ma l'ampia apertura tiene il vapore nella parte bassa, si vede comunque bene. Il fissaggio sulla testa è molto buono, una volta regolati l'archetto superiore e quello posteriore (quest'ultimo con ruota di regolazione rapida a scatto, molto solida) non si muove di un millimetro. Unico "neo" potrebbe essere la plastica non particolarmente spessa, anzi direi abbastanza sottile, sono DPI da "trattare bene", non da buttare nel retro del furgone. A me da fastidio la protezione in stoffa morbida sulla parte frontale, perchè mi fa sudare la fronte, ma non è un difetto, anzi è estremamente soffice, però io la tolgo sempre su tutte le maschere e sui caschi, e ci metto al suo posto nastro americano, e uso una bandana, per non trovarmi pieno di trucioli metallici o altro (la testa è scoperta, ripara solo davanti e leggermente sui lati, non in alto. Che dire, per me è stato un buon acquisto. Tra l'altro a meno di 20 euro, visto che ne rompo sempre due o tre all'anno, a dicembre mi salta fuori la pizza gratis :-P

utilisé pour poncer mon chalet. Protège bien des projections directes. Et pas de buée. Pour moi, porteur de lunettes, c'est essentiel.