Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A

Good quality, all you need to bend PETG.

Okay products took a bit long to get to you uk

Pretty easy to work with. Heat them up for bending. They look good and have a thick wall so they won't leak.In my GPU loop, I needed three lengths. One I wasted trying to bend one of the tubes going to the res. Failed three times before I made one that worked.Worth the price.

Llego antes de la fecha bien empacado y sin problemas

I am currently working through building my first loop, like almost everyone that is probably looking at purchasing this product. I spent a few hours looking at different tool sets ranging from $20 to upwards of $100. I eventually chose this one and I'm completely satisfied with my choice. The toolset works great, especially the tube cutting tool, and it has made working with hard tubing (16mm) not so bad.Now that I am going through the build process, it is hit or miss whether I actually use the bending dyes to make the angles. Sometimes, I find it is almost easier just to get a good bend doing it by hand. Nonetheless, if you want to use the pre-cast angles, the tool works great as long as you get the tubing hot enough. I am using the Thermaltake PETG V-Tubler 16mm tubing and I find it is very forgiving … when I mess up, I am often able to just bend the tube back to straight without ruining or distorting the piece and then I try again.TLDR of this review: spend the little bit of extra money compared to other sets and get yourself a nice set of tools such as this. You have already invested a ton of money in a custom loop and this will just make the whole process that much easier rather than fudging around with cheap cutters and other cheap tools.

This is a great tube bending kit. A must have for doing hard tube watercooling. Really solid construction and will last a lifetime of hard tube builds! The silicone insert is firm and easy to push into the tubes. If you are using acrylic tube the pipe cutting tool will not work as acrylic is too brittle and will end up cracking and breaking. For PETG the tube cutter will work great. Overall I am very happy with the purchase and would recommend it to anyone getting into hard tube watercooling.

Worked out great, and price was more reasonable than some other brands that were available and half the tubing. Pipe was very easy to bend, as long as you don't use a too high temp you are fine. You are able to reheat a tube if it did not turn out right, but you have to be careful as you can warp your bend even more.Would purchase from again! Some bends did not turn out absolutely perfect, but I have plenty of pipe to redo everything in the future.