ZMJH ZMA102 Bidet Toilet Seat, Elongated Smart Unlimited Warm Water, Vortex Wash, Electronic Heated, Warm Air Dryer, Rear and Front Wash, LED Light, Need Electricity, White, (Elongated)

Came with everything it was supposed to, and also what appears to be a roll of tape with a purpose I know not. As a non-plumber person, I found installation pretty easy. Anyway, I read all the reviews and sensed that some of the complaints may not be the fault of the item. The only one I'd like to dispel for you is the issue of the water not working after installation. This happened to me as well, but because everything had been done correctly (and honestly because this was my second bidet attempt this year), I wanted to see if there was something I was missing. I sat on it and read the manual thoroughly, as opposed to just skimming and mimicking the drawings. On one of the last pages it instructs that if the water isn't working, air may be in the tube. So I got a little pail, pulled the tube out of the reservoir for a few seconds (it says 30, but that sure seems long to have water gushing out of anything), and replaced it. Plugged it back in, turned it on and left the bathroom- instead of staring at the blinking light to see if it would stop. When I returned, the light was not blinking and ta-da! It worked exactly as it should.I will say: it does seem like a a few things have adjusted since I first installed a couple weeks ago- the water pressure for the rear has eased a bit, and the water pressure for the lady parts intensified. It's set to high. To a degree it doesn't matter because the lady parts function only worked for that area the first couple times; it now only hits the rear, and the higher power is good for that. I don't know how I can be sitting so drastically different that the lady parts function is ineffective after seeming right initially, but I honestly didn't get a bidet for my front parts. The oscillating feature was also more obvious during the first couple uses, now not as distinct.All in all I like it and have my fingers crossed that in 6mos the water will still get warm!

My experience with this product is not too dissimilar to others on here. I almost gave up on this product a few times and planned on returning it. Then, as if it knew it needed to work or disappear in whatever warehouse the Ark of the Covenant did in the first Indiana Jones movie, it just… started working. My review will highlight how it came to be, so you hopefully don’t throw it away immediately when it doesn’t work.For starters, this thing isn’t that hard to install on the toilet. Before you install the seat and power it on, though, it’s a good idea to manually fill the reservoir. Flip over the seat and you’ll find a plastic screw (Phillips) just above and to the left of the seat housing (where the buddy seat clips into the mounting on your toilet). Unscrew it, fill up the reservoir (be careful not to spill - you don’t want to damage anything electronic), and screw it back in. If you’re feeling confident, you can do a 2-for-1 here by using included PVC tubing once connected to the water supply. Crack the angle valve to give yourself a slow, controlled supply through the PVC tubing to fill the PVC tubing AND the reservoir so no air gets trapped in the system. Connect the tubing to the seat, flip over and mount the seat to the toilet. Power up the bidet, and now for the coin toss…You’ll either have it work immediately and be happy, or everything but the water dispensing will work. In my case, the water dispensing still did not work. My troubleshooting was cut short due to a change in work schedule, so I left it alone for 2 weeks. When I came back, it was fully functional. Possibly something inside the reservoir loosened up in my absence? Either way, time with a full reservoir may play a role here…Now that it’s working, I will say that the auxiliary features (seat and water temperature adjustments, primarily) are really nice features. The water pressure seems a touch lower than I assumed it would be, but it gets the job done. The night light is a welcome addition, so I don’t have to blind myself in the early AM hours. Would be nice if the power cable were a few feet longer, but I have set it up so it isn’t an outstanding issue. This thing, when it actually works, performs as advertised. If you’re looking for a good bidet with some bells and whistles, and you’re willing to invest time and effort to make this thing work (I won’t hide that fact - it seems like some of us had to do some additional troubleshooting here…), then this thing is great, especially at this price point.Good luck!

The product itself is quite good. It operates as advertised and does a good job of cleaning and drying.The only issue was, on installation on my toilet the shut off valve was cramped against the back of the commode base. I was able to install it and get the water on; but turning the water back will be a different story.A friend of mine installed the same unit on a toilet in a manufactured home. The fittings were completely different and he had to change the attachment fittings to make it operational.Just be aware that all toilets are not created equal.I would have given a higher overall rating if the shut off valve would be more usable.

Seems a bit weird to share this info, but it is a bidet review. This unit does not have a specific feminine cleanse cycle, which every woman needs if they still have their period. The accuracy of the rear wash is Zeroed , right on target for the booty and the stream is intense so be prepared. There’s no handy valve or control to lessen the pressure for the bidet without turning down the entire toilet. The seat warmer is heaven, the blow dry is perfectly aligned as well. I and my husband are very pleased with this product.

Would have given it 5 stars but was disappointed that the wand reach is not adjustable. But scoot a little and it hits were it needs to. Install was simple, I did prime the seat by filling the seat via the drain plug.