GOOACC 100PCS Bumper Rivet Clips Fastener Screw for Yamaha Rhino 450 660 700 Grizzly 600 Body Fender Hood Fuel Tank Panel Push Fastener Rivet Screw Clips

These clips work well on the lower front plastic body protector (bib) of my 2005 Honda CRV. They fit well and are easy to insert once all body pieces are lined up. There are many spots needing the clips/plugs, so buying the large count that came in this package is good. I will note that the plastic body protector that wraps around the wheel well has a slightly smaller hole and will not fit these 10mm pieces correctly. I will look into the 9.3mm clips that I see in other offerings for this specific location - apparently I did not need to remove these but broke the old clips once I did unfortunately. Seeing as the original clips were 20+ years old, I threw them out and replaced all with these new ones. They appear well made, and hopefully will last 20 more years.

These lookjust like Honda rivet clips, nearly indistinguishable. After 6 months, they are holding up just like their OEM counterparts. 40 pieces are a lo,t but these clips are busted and lost all over the fenders if you have an older car.

I do not work for this company. I am a weekend mechanic and I have worked on a lot of cars over the years taking off plastic trim, etc. especially Hondas. I personally hate when these plastic clips are missing on the finished parts, but that's just me. A lot of car owners never even pop their hood! These are very good quality for the price. I actually took out an old plastic clip that was original OEM and compared to these- they are pretty much identical. The plastic quality also looks about the same as the originals. For people who argue these are not the same quality plastic as the original manufacturer - let me tell you, if your car is greater than 10 years old, try to pop some of the original clip fasteners off and see how many crack and break! These new ones will be superior quality to the original ones on your car, because they have not been out in the elements for years. And with these you are not paying close to $1 per clip if you go to your local dealer. Someone also wrote the 40 pieces counts the separate parts and you really have 20. I don't know how someone could miscount, but let me be clear, it is 40 total usable clips. You will use more than you think, especially when you inspect the old ones and see how deteriorated they are. Again these work great on Hondas (for me specifically on a 2007 Honda Accord). You just have to measure the hole and if it is 10mm these will work. Not all plastic fasteners on a car will match this, but most any plastic inserts under the hood, and front and rear bumper attachments. You cannot tell the difference from the originals visually- they are a perfect match!

Worked well on replacing missing clips on my GM vehicle

This is a perfect OEM replacement for my old retainers for my radiator shield, I used them for a 2003 Ford Crown Victoria. I would highly recommend these, they look the exact same, same size, durability is more than likely the same due to the material obviously, so if you by a chance remove them often, you'll probably need to replace them, but if you order this pack, you will get more than enough.

Item was as described! Im satisfied.

These nylon rivet clips (I call them push pin rivets) are found in lots of Hondas and Acuras. Although re-useable, they eventually crack and wear out so I like to have extra on hand. My Honda Fit plastic splash shields in the front fender wells are held in with many of these as is the front chin spoiler and the splash shields under the engine bay. Over the 14 years I've owned the car those have all been removed multiple times. I ordered several other kits on Amazon that were a little cheaper. They had lots of sizes that I don't need and the quantities were not as advertised. I returned them and bought these. The ad says quantity of 40 and guess what? There were 40! These are good quality and I like the design. There is a deep groove on the flange which makes it easy to slide a small flat blade screwdriver under the lip of the rivet head to pry it up to remove the pin. These are good quality rivet pins.

This good

Thinking all inserts would fit, if one insert does. Not the case. Hyundai seems to make a number of various sizes and even my garage said this and they didn't have one that fits my grill cover

Ne clip pas aussi bien que les originals, mais font le travail

Worked perfect for my Honda element

Las grapas son la medida correcta para los paneles exteriores que van en la puertas de la Mazda CX-5 2016

Gut und günstig