EZDIY-FAB M.2 SSD heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5 for PCIE NVME M.2 SSD or SATA M.2 SSD- Black

I have to say I'm might impressed as for a £11.99 (what I paid for it) heatsink it's kept my 980 Pro 1 TB NVME pretty cool. Well, at average temps of 47 degrees celcius and max operating temps of 52 degrees celcius (regardles of ambient temps) in comparison to potential ran away temps at 80 degrees plus... it's pretty cool lol.The obvious caveat applies, the temps really depend on your case and airflow. The H500M case i'm using has two 200mm fans (at 370 rpm) so plenty of airflow whilst keeping them extremely quiet. These ramp up to 500 RPM so can provide alot more airflow if required. At such RPMs, the temps reduce down a few degrees on the nvmes.In regards to the aesthetics, this is the only cheap heatsink I found that somewhat closely resembles the Western Digital SN750 Black NVME. Additionally, it's fairly low profile so it does fit below GPUs albeit with a few mm clearance.Highly recommended, at the time of writing this review the price is 12.99 and even at the price I still recommend it. No more than £15 though as you can get the sabrent rocket heatsink at £20 - £22 which would seriously keep your NVME cool. Downside is that you will have to use bottom NVME slot on your motherboard as it's extremely chunky so will clash with the GPU.

This heatsink is great for anyone wanting to upgrade their PS5 storage and don't want to pay a ridiculous amount more for a pre installed heatsink on an SSD. I used this on the WD SN850X 2TB and the installation was flawless, alot easier and less scary than I thought it would be. If you're also looking to upgrade your PS5 storage, I recommend checking out Mystic's video on YouTube about how to install a heatsink on an SSD and install it into the PS5. He goes into great detail about the whole process and even uses this exact heatsink so it made the whole process a lot easier. Overall, great heatsink for a reasonable price!

Easy to install on a WD black sn850. I have this fitted in a ps5 and there have been no overheating issues.

I was unaware that my motherboard M2 cooling plate would be insufficient for a 4TB Seagate Firecuda 530 drive. I was getting transfer speeds dropping off to zero after a while and lengthy system pauses where SSD activity would drop to 0%. I thought the drive was faulty. Started to get suspicious it was thermal throttling as the bottom side of the drive had no heat transfer. Bought this, installed it and now the drive is performing optimally under heavy loads. Not seen temps go above ~54 deg. On top of all that it pairs well with my Gigabyte Aorus mobo which is mostly black

I bought a Samsung 980-pro to drop into my PS5, Sony recommends a heatsink and this one was within the dimensions given.It's a well made heatsink, it comes with two pieces of thermal tape a spare screw and a pretty useless cross headed screwdriver.Installation is straight forward, you will find the plastic on the tape is two different thicknesses, peel the thin plastic off first it's easier to manoeuvre/put in place when still attached to the thicker plastic.As I mentioned the screwdriver included is terrible/too small, you will be doing yourself a favour using your own micro screwdriver.I paid £11.99 for this HSink, given the cost of the 980 pro was £170+ if it does its job it's money well spent.I've been playing a lot of games today (PS5 beta firmware) off the drive and it hasnt been laggy at all (no signs of thermal throttling).Buy with confidence(I forgot to take photos I'll maybe add some in the coming days)Hope the brief review helps in some way.

Useful rwteo fit heating for expandable storage and allows cost saving over more expensive integrated styles. Used for cooling for ssd in a PS5 without any fitment or performance issues

Worked perfectly for new 4tb ssd in my PlayStation 5

I bought this as a much, much, MUCH cheaper alternative to a Western Digital NVMe drive with a built-in heatsink for installing in my PS5. This easily saved me probably €140 by buying the NVMe drive without a heatsink and buying this to go with it.It was extremely easy to assemble the heatsink around the NVMe drive. It was more difficult to recover the cover off of my PS5 than it was to assemble this. I have it installed in my PS5 for more than 3 months and it is working perfectly. I cannot fault or criticise this product at all, not currently anyway.