Sovol SV06 Plus 3D Printer with 300℃ High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch

The media could not be loaded. I've just recently gotten back into 3D FDM printing and I was interested in purchasing a new printer that had some of the latest bells and whistles. When I began researching the purchase I became a bit overwhelmed due to countless brands, types, sizes and price ranges of printers that are on the market Needless to say I had a difficult time deciding on which to buy. I ended up stumbling across a video on youtube reviewing the Sovol SV06 which led me to finally make a decision. I thought the price was great and it has all of the features that I was looking for in a printer. I made the purchase on a Thursday night and it was on my doorstep by Saturday morning.Unboxing impressions - This printer comes packaged very well.... It's packaged so well that I didn't see the extruder assembly in the foam packaging and almost threw it out with the foam. All parts and pieces are tightly packed and there was no sign of possible damage to any of the components. Good job Sovol.Assembly impressions - Getting this printer put together and ready for printing was easy and quick (15-20 minutes). The instructions are simple to understand and the packages of screws used for assembly are all labeled based on which step you're on in the process. It couldn't have been easier.Getting it ready to print -The instructions show you how to level this bed properly using the mesh leveling. First you level the Z, which is automatic. Then you auto home and set your z offset using a piece of A4 paper. You then tell the printer to run mesh leveling which takes a couple of minutes but then you're ready to go. No more fiddling with knobs to level the bed (Amen!)Print quality impressions -Like most folks my initial print was the file that's included on the SD card - in this case it was the Boat Benchy. I'm not used to having perfect first prints on a brand new 3d printer but this one comes really close. There were a few whisps of filament on the model but nothing I'd go so far as to call "stringing" and one quick blast of heat from the heat gun made all whisps disappear. (Photo attached shows the whisps.) Ever since then I've had nothing but fantastic prints. Some models have whisps, others do not so I think it has more to do with me not having settings dialed in for the different filaments that I've been using. Regardless, the prints turn out looking great!After several successful prints on this machine I wanted to really test how level the bad was by loading it up and watching the first layer and I've attached an image to this review that shows just how well that layer went down. It was perfect and consistent across the entire bed. Adhesion was good throughout the entirety of the print and all parts turned out excellent (the parts in the photo were used to make the robot hand which is also pictured)The few failures that I've had on this machine have been while attempting to print with old Sainsmart TPU that's been sitting around my house for a year or two. I've attempted to dry it but I haven't yet to dialed in the settings but I expect that I'll have better results once I do.Filaments that I've used to print with so far - TPU, PLA, PLA+ and PETG.This is my first time attempting to print with PETG as I've always heard that it was a difficult filament to get quality prints with and surprisingly I've had NO issues and it turns out I really like printing with PETG now (go figure). Inland PLA+ has also been a really good filament to print with on this thing.The only minor thing that this printer is missing is a filament runout sensor. I've never had to rely on one but it's a nice feature to have, just in case. Sovol has addressed this with the release of the SV06 Plus that just recently came out and you bet I also ordered that printer for the larger build volume. .So, all in all I would absolutely recommend this printer to anyone. Ease of use and the high quality prints right out of the box makes this a great buy for beginners as well as those that have experience. For the price you can't go wrong with this machine. Mine has been going nonstop since I put it together!

The media could not be loaded. Short(ish) version: I'm a medium-level 3D printing enthusiast, 3 years of mixed experience/results with an Ender 3 since 2020. I picked up the SV01 Pro in October 23 and it was so easy to build and use, but I wanted more build area, plus a second printer so I could run concurrent print jobs. I did a fair bit of research and determined the SV06 PLUS to be a solid value. Purchased this guy November of 23, and holy cow was that it a good decision. I mean, here are some of the important boxes this printer checks for me: 1) More build volume 2) Higher print speed capable 3) Self-leveling (not perfect but shockingly good!) 4) Pause/Resume when it runs out of filament (more details below how this saved my six-day print) and 5) In general terms, for my uses, this was a wonderful next step in my 3D printing hobby. Honestly, I can say my new printers have made printing FUN again, and I get to spend time printing again instead of constantly calibrating in between prints.More details: I'm not here to trash Enders, especially since my Ender got me into the hobby (January 2020). I did however eventually get tired of the bed leveling, failed prints, and constant babysitting. To tell the truth, I was hardly printing any more come 2023. My coworker was talking about this SV01 Pro he got cheap and how reliable it was. I said why not, got myself an SV01 and was just instantly having a GREAT time! My only problem - I had the desire to print larger stuff. I joined the Sovol groups on Reddit and FB, and did a lot of reading. The clear consensus was that the SV06+ is one of the best bang for the buck printers available in general. I chose the standard (read: non Klipper) model. Klipper is a whole other (and interesting) topic but I'm not looking to address that in this context, I may tinker with it on my Raspberry Pi later, but I'm just running things stock. So the SV06 arrives, and within about 30 minutes I had assembled it and started the leveling process. As soon as that was done I connected my Raspberry Pi with OctoPi and set up a printer profile so I could print from my PC instead of using the SD slot. I'll go ahead and mention the con I have with this printer because this is where you'll notice it too: The power supply has a significantly loud fan. It's not a deal breaker for my situation because my printers are in the basement, but trust me about the noise of the power supply in case that would be a problem for you.Anyway, It's been about 4-5 weeks of non stop printing for me. I've shared several photos, and one video for this review. I printed a cool marble track model but should have scaled it up in size because it would only fit smaller ball bearings. Turns out the SV06 was big enough to increase the model to a size where I could use regular marbles! The model took up most of the build volume on the SV06 and would provide a great stress test. This beast was a 6-day print and on day 4 when the spool of filament ran out, the filament sensor on the printer paused it automatically, moving the hot end to the side so I could mount a new spool and load the filament. Then I hit resume (holding my breath because I hadn't actually tried this before) and it just picked up where it left off. If you check my video, you can see the finished product which is pretty cool - it has an Archimedes screw that lifts the marbles back up where they randomly fall out to the 4 different tracks and down again.Summary - I hope this helps someone that's on the fence! Potential buyers should be aware of the loud fan on the power supply, but I can sincerely recommend my SV06 plus based on my experience. It's fast, it has been reliable, it successfully printed a monster print for me (hopefully the first of many), and it's been easy and fun to use. I still don't know if I'd call it a "beginner" printer, but I've been teaching my son and he picked it up right away. We're having a blast printing organizers and accessories for a bunch of our favorite tabletop games. Two thumbs up!

After my printer was working for about 6 months, it started screaming at me. I was getting a MINTEMP error and checked the underside of the printer bed to see a detached wire. I determined that the thermistor detached from the underside of the printer bed. I was using my printer maybe 1x-2x a month, so it was not heavy use. This was an issue I had seen with previous versions of the Sovol SV06, and it appeared that Sovol attempted to remedy this by adding a strain relief, so I am unsure as to how this happened. I was really enjoying the quality of the prints with this printer, and I knew at this price range to expect to DIY issues that would come up. However, I was extremely disappointed by the lack of response from Sovol. I reached out twice, once on their website and once via their email. Nothing. I also know that this is not something unusual for Sovol, as when I was searching about this problem on YouTube, other folks had trouble connecting with the company. I am going to try to solder the connection back together, but if I am unable to do so successfully/Sovol does not reach out to me, this review will remain 1 star. If either Sovol reaches out to me or I am able to DIY, then I will bump up the rating. Issues like this make me think I should have just spent a little extra on a bambu printer.