GIANTARM TPU Filament, 95A TPU Filament 1.75mm, Dimensional Accuracy +/- 0.03, Flexible Soft 3D Printer Filament 1kg Spool(2.2 lbs), Vacuum Packaging (Clear)

This is my first time trying TPU, so I set my speeds low and tested a few different prints. Everything came out great and squishing the animals I printed is fun. I also printed a couple soda can lids which will really come in handy. I'm excited to print a lot more usefull and fun things like cable ties, and some different balls I've seen file for. I will say the color is a little more pink than shown in the images, but my photo looks even more pink because of the lighting bouncing off the coke can.

Used Bambu TPU preset for 95A TPU and printed on "Optimal 0.16"Benchy came out fine, first layer looks gorgeous with good adhesion. Packaging was a bit Jank, came in thin shabby ziplock and no silica packets.

I am a fan of and normally purchase Bambu filament, but I saw this on 3dprintingdeals for a really good price, so I thought eh, I'll give it a try. I printed out a sample card on my X1C, a habit I have whenever I get a new roll of filament. I am REALLY impressed. I've used TPU a few times before (I always printed it on my Flashforge...hadn't tried it on the X1C until now), and I've always had trouble with it -- stringing, under-extrustion, poor adhesion -- pretty much the gamut of printing issues. But not with this Giantarm TPU. I dried it for about 12 hour and kept it in the dryer while printing, and it came out PERFECTLY. First, the color was beautiful -- it's a very nice blue but it's fairly transparent which I haven't seen from other TPU I've tried. Second, stringing was minimal -- I have never had luck with TPU without a ton of stringing even after drying for long periods. Third, adhesion was perfect (I used the textured plate), and it also came right off the plate without issue. It was just EASY -- something I haven't found with other TPU.I don't normally review filament that I buy but this one kind of amazed me.

UPDATE: Stars changed from 5 to 4. I was so impressed with Black, that I ordered Yellow and Red both of which do not print as well as the Black. I had to change print settings fairly drastically in order to get the red and yellow to print at all. Upon delivery I was able to confirm the red filament, although it appeared to be vacuum sealed, was not. Air had already infiltrated the package before I opened. The Yellow however was sealed tight however both yielded frustrating print results and total failure as it constantly jammed. Visual comparison between the red/yellow and black indicate the black was wound more neatly, and more uniform. The red/yellow had minor twists and turns which help the jamming process in that if it's already bending in one direction it will easily give in that direction when its being pulled and pushed into the extruder resulting in a jam. I've had luck with the following updated settings and unwinding the spool while winding onto a smaller lighter wait spool and completely loosening the feed pressure.Updated settingsTemp: 233Speed: 20mm/sRetraction 1.5mmFan: 50%ORIGINAL REVIEW:Spool was vacuum sealed upon delivery. I was skeptical having not used this brand or having ever printed with TPU in the past as I had great success Flexible PLA in all colors but black. After reading and combining recommended settings from multiple forums, I had a perfect print right out of the gate without glue on a flexible course metal bed.Sovol SV04 Settings in Cura 5.4.0Layer Height .15mmCross Infill 30%Nozzle Temp 220cBuild Plate Temp 56cPrint Speed 30mm/sTravel Speed 120mmInitial Layer Speed 20mm/sInitial Layer Travel Speed 80mm/sRetraction OnRetraction Distance 2.0mmRestration Speed 20mm/sRetraction Extra Prime Amount 1.0mmRetraction Min Travel .8mmMax Retraction Count 10000Max Comb Distance with No Retract 10mmFan Speed 100%Initial Fan Speed 0%Regular Speed Layer 2Good luck!

Great overall TPU. Worked great on external spool holder on Bambu A1. Used Bambu TPU filament profile in Bambu Studio. Filament game dry and worked without the use of a filament dryer. I will continue to seal this after each use to ensure it stays dry. Great finish and a medium squish. Perfect for first timers of TPU printing.

I got this filament since I have a series of projects that are due later this summer and need TPU. I was pretty excited to get this roll since it’s been a while since I dealt with TPU. The filament itself was pretty cool since it was flimsy and reminded me of string licorice, but when it came to printing, it was an absolute nightmare.I have done numerous prints with it and the quality was poor. Only one print sadly came out successful and the rest of the time, it was clogging my printer nozzle and getting stuck between the gears causing my printer head to malfunction. I figured since my area can get humid during the summer months it was the case for this. So I got a dehydrator to fix it and sadly, it didn’t work. It seems like this was just a bad batch in general.So I did set up a return for it, but I admit I’m disappointed that I didn’t get to fully see it in action. It would’ve been really cool to see some final products out of it.

Great TPU filament. Has great flexibility which is nice when printing toys for my kiddos (they are young and toys get thrown). I really like this brand, I have had zero issues with the adhesion and the color is pure black which looks awesome. I have already printed out a couple of ducks, and I will need to print out some baby dragon toys for my littlest. Overall I am very satisified and would buy again. Great Price for such a great filament!

I have only ever used the silver color filament from this brand, but its very strong, always prints perfectly and never had to use any glue