Zenner kit 1 curved track, 2 track (64mm) and gauge G, 22.5 °, R = 900mm, 22.5 °, brass profile, consisting of:now appeared with 3 Massoth screw in connectors and 19mma) 1 x 13 three rails sleepersb) 1 x curved track sections outsidec) 1 x curved track profiles, insideThe track profiles are pushing into emerging beds and connects the track through our Massoth rails schraub connectorFor a circle you need 16 tracks.The scope is approximately 5.65 m in the center of the trackOption: Train Line45 rails schraub connector.By turning over the sleepers can be produced both variants of the three-rail tracks (narrow-gauge 45 mm inside or outside).The track is an industrial track to drive slower.Good for the railroad cars and locomotives, which have rigidly mounted without axles bogies and no longer than 400 mm are shown.Tests with longer carriage have not been made.This track radius there are not in the track II fan community so far. There are basically with this tight radius no big problems.However, one should note the following:- Short converted LGB locomotives as the Köf often have no traction tires.For more than three cars, it can lead to problems because the rims of all cars and the locomotive grind more on the rails than at larger radii.This can cause the wheels of the locomotive by turning.A higher weight Locomotive has solved the problem.- Rigid buffer without suspension as with two locomotives can abut.In this case, the buffer holder must be shortened after deducting the buffer about 1.5 mm- The game between the rim and the track profile is still in a carriage with 300 mm length still 2 mm.In order to prevent the rising of the wheels, such measures are possible that are not feasible in the short term but all:Install a) Bogie for uniaxial car, so eliminate rigid bearing.A conversion is costly.At present, such tools are not availableb) track slightly i
Trustpilot
3 days ago
1 week ago
