Tub Repair Kit White, Tub Chip and Bathtub Repair Kit for Enamel, Fiberglass, Acrylic, Porcelain, Patch and Repairs Chips, Crack, Scratches, Rust, Holes on Tubs, Toilet, Sink, Shower, Tray in Bathroom

My wife used this kit to repair a scratch in our bathtub, and it worked well for our needs. Color Match: The white isn’t a perfect match to our tub, but it’s close enough that you wouldn’t notice unless you were really looking for it. For a DIY repair, it blends in well. Ease of Use: Easy to use - my wife had no trouble applying it. The instructions were straightforward, and the process didn’t require special skills or tools. Results: Looks good! The scratch is no longer noticeable, and the repair has held up well. Much better than living with a visible scratch or paying for professional repair. Value: For the price, this is an excellent alternative to costly professional tub repair or replacement. Pros: ∙ Easy to use ∙ Color close enough to standard white ∙ Works on multiple surfaces (enamel, fiberglass, acrylic, porcelain) ∙ Repairs chips, cracks, scratches, rust, holes ∙ Final result looks good ∙ Much cheaper than professional repair ∙ Holds up well Bottom Line: For DIY bathtub repair, this kit does the job. The color match is close enough, it’s easy to apply, and the results look good. Recommended for anyone wanting to fix tub scratches or chips without professional help.

Ankita Tub & Sink (epoxy) repair kit really works, I had a porcelean sink crack with three very long cracks which ranged in 10 to 12 inches long. I figured the sink was done for. However I was willing to try this product since I really didn't want to have a remodeler come into the house during artic temperatures of single digits and have to replace a sink that was mounted below a large granite countertop - it's a massively complex job due to the way it was installed many years ago. The Ankita Tub & Sink epoxy fixed the cracks perfectly sealing them and the white matched up perfectly with the color of the sink. I am extremely happy with the results, and highly recommend this product. It was a straight forward job and not hard if you follow the instructions. For best results I recommend that you also do the following: 1) The white tape that came with product is good and works, however it was almost the same color as the sink so I substituted blue painter's tape instead and it was much easier to do the job because it offered a contrast between the white sink I was repairing. I noticed that the picture of the Ankita Tub & Sink epoxy kit shows blue tape, but mine came with white tape. 2) Search for the product on YouTube and watch a few of the videos of users doing sink and tub repairs. It makes it so much easier to do the job because you'll know the techniques so you get the best results. 3) DO NOT RUSH THE REPAIR JOB, this is a take your time and do it right type of job, give yourself a whole afternoon. 4) Take your time sanding, use the tougher grit sanding paper in the Ankita kit first and and then the smoother grit last. You want to treat the sanding as if you sanding an art project, the more carefully you sand it the better it will turn out. 5) If your cracks go all the way through the sink (like all my three cracks did), make sure to seal the bottom of the sink too. I would have sealed the bottom with the Ankita Tub & Sink epoxy but nobody sees the bottom of the sink so I decided to use J-B Weld (black colored) Epoxy (Professional cold weld #8281) since it's industrial strength epoxy. The way you can tell if the cracks go all the way through the sink is that water leaks from the bottom of the sink where the cracks are located. When I sealed the top with the sink with teh Ankita Tub & Sink kit, no water dripped or poured from the bottom of the sink so I know if worked. However the cracks on the bottom of the sink were still there and I was afraid if in the future during cold or warm weather the cracks below may expand or cause future weakness. The J-B weld sealed the cracks perfectly in the bottom of the sink. In closing the Ankita repair kit saved me a lot of money and aggravation. It's an inexpensive tub and sink repair kit that really works!

Works great to strengthen hairline cracks but anything with a small (1mm) of a gap it does not work so well when stressed.

This tub repair kit was quite easy to use and did a good job repairing a bad 2 inch circular spot where the soap sits. However, the color I ordered was not an exact match so it still looks less than perfect. Had the color matched it would have been a superb repair, my fault.

If you are patching a hole, be advised that you should use mesh that’s appropriate for the surface you’re trying to repair. This kit does NOT contain mesh. You will need to order it separately. We knew enough to order and use mesh and the repair turned out fine. Mixed and applied properly, the resin works fine. There is no good reason for them not to include a small amount of mesh. It’s cheap and will create a lasting patch…

I really didn't know what to expect. I followed the directions and the result was extremely good! The color match was perfect!

Owning an older house and being "a bit particular" can quite often present a challenge. After moving in we noticed there was a small chip in the wall of the bathtub, and a similar sized chip in the toilet bowl in the master bathroom. Loath to replace either, I stumbled across this kit. I've been aware of two part epoxy for some time, but this kit makes it very easy, with simple to follow instructions. Over the course of an afternoon I was able to patch both the tub and the toilet bowl and the finish on both although noticeable is smooth and clean. Both needed two applications (mix, fill, sand / polish) as the hardened resin sank. The instructions do make note of this. The end result is waterproof and overall I'm happy with it. I'm not confident that this would do as good of a job on a larger hole or crack, but since I didn't have need (and hopefully never will) for that type of repair I won't comment further. There's certainly plenty left over after doing my repairs. The color is stark white, and I do wish I'd mixed a little paint or something in to match the color of the older tub as it does draw the eye a little, but overall a very solid product.

Had 2 small scuffs were the porcelain was hit off of our bathtub. The stuff is easy to mix up and spread and I think the problem that I had was both of them were on an angle and wasn’t flat once I put it on I was able to send it the next day and I am happy with the results. I just wanted to make sure that the bare metal underneath was covered up and it does seem to almost feel the same material as the porcelain. I would buy this again and hopefully the tubes stay good for a long time in case I need it.

Easy to use; great coverage: not a huge amount of product

it will nicely fix crack. just make sure the crack you are trying to fix has a solid ground and not moving. the compound is hard and does not like moving base under.