Note that the photos can not convey the entire shine and play of light, so in fact there will be a bright shine with a color transfusion. Note: DO NOT use on non-heat resistant fabrics (which are ironed at low temperatures), such as nylon, vinyl or leather. Do not bleach. Application with iron Prepare a work surface for transferring. The surface must be flat and rigid, to create an even pressing force during transfer. It is impossible to perform transferring on a soft surface, on ironing boards with foam covers, on soft felt types, etc. Set the iron temperature control to the maximum "●●●" position (t. 320 - 380°F) and wait until it warms up completely. Remove the white embossed substrate from the design. Apply the iron-on applique with a sticky side down to the selected place of the product. Cover the applied thermo-application with a sheet of paper (tracing paper). Press the heated iron on the applique, do not move the iron during pressing, the fixing time is 15 seconds. If the size of the applied transfer is larger than the size pressed by the iron, move the iron to the unheated area of the pattern and repeat the process. The zones must overlap with each other. Be sure to make sure that you have not missed a single spot on the glued thermal application. Allow the product to cool, and then slowly remove the cooled transparent film from the product (the spangles will remain glued to the fabric). If, when removing the film, not all spangles are stuck to the fabric, return the transparent film to the previous fixation point and repeat the treatment with an iron for this area.
Trustpilot
1 week ago
3 weeks ago
