EZDIY-FAB PCIe 5.1 Adapter - 600W 12+4pin, 16pin 12VHPWR GPU Power Connector, 12V-2x6 GPU Adapter,180 Degree Right Angle - Compatible with RTX 3090Ti, 4070Ti, 4080, 4090 GPU - STD Type, White, 1 Pack

Feels sturdy and expensive, although it’s bulkier than I expected. I wanted something like this so I didn’t have to flex my 12VHPWR cable 180 degrees, and also have it touching my AIO tubes. This resolved that.This item is both functional and aesthetic!

Have been using this on my 5090 for about 4 months now. No issues at all, very clean look and no melting. Zero complaints. Make sure you order the correct configuration for your need though as there are multiple options

This 180° adapter is a perfect component for cable management in your builds and is a good value for the money.Functions perfectly well for my 4090, solid connection on the power port, and it's best suited, in my opinion, for vertically mounted GPUs since it hides the power cable out of sight give a cleaner look.I didn't notice any overheating on the connector either so it's safe and will not "melt" your GPU.Overall, I highly recommended this connector for that cleaner look in your PC builds!

*After finally getting this delivered after a 2 day delay I was very Skeptical of installing this on my brand new Asus Tuf RTX 4090 OC.*I spent hours of research looking into the 12VHPWR failures, Cable/Mod's recall, reddit posts, and watching GamersNexus coverage and testing of the failures.*I finally gained the courage to install this hefty lil 180 adapter knowing what to watch for.*First thing I noticed when connecting the native PSU 12VHPWR cable in is the tight fit of the connector which is a very very good thing, pins inside are making complete contact and cannot be tilted to one side. "Some connectors where loose and could tilt causing the pins to misalign and create incorrect impedance which would lead to pins heating up on the connector leading to failure."*Connecting it to the GPU is just as tight and clicks into place, nice and flush.*After getting it installed I turned on my system and left it idle for about 10 minutes watching the adapter closely and using my Electronics IR thermometer to periodically check idle temps and averages 35c on both connections.Good so far.*I then stress tested my GPU using Metro Exodus Enhanced Edition benchmark and Unigine Superposition maxed out 4k. The temps I seen on GPU Connector 47c- 50c and the PSU connector 48c - 52c and the heatsink 46c.*When compared to IR thermal imaging that GN Steve has conducted, his results where average of 65c on a good cable.*So in conclusion this 180 adapter is actually good. Time will tell and I will update if that changes, if I don't update, that means it's still kickin.

Works as intended, although the connector itself gets super hot with an rtx 4080 overclocked. I probably wouldn't use this with any more than 350 watts. AKA 5080, 4090, 5090=Possible melting.

Very aesthetic, functional, and has no problem powering my 5090 so far. Big fan

EZDIY-FAB PCIe 5.1 GPU Power Connector did not interface with my RTX1090 GPU, no video was produced on the monitor. However, my flexible wired power connector/cable worked fine and produced video on the monitor. The 180 bend on the EZDIY-FAB made it extremely difficult to press the release tab and disconnect/remove the EZDIY-FAB Power Connector.I returned the EZDIY-FAB, during the return window and received a partial refund. Seller/Amazon claims item was not received, weeks outside the return window and attempts to recoup refund already issued. I would not recommend buying from this Seller for this item. Incorrect advertisement and doesn't follow return policy.

This 180 degree power adapter is exactly what is needed to hide the incoming power cable behind my vertically mounted GPU. Having the cable neatly routed behind the GPU makes for a clean look and shortens the cable path considerably. Its running a RTX4090 GPU with zero issues. Stays nice and cool during max power draw of 450 watts. Highly recommended!