HUANUO Single Monitor Mount, 13 to 32 Inch Gas Spring Monitor Arm, Adjustable Stand, Vesa Mount with Clamp and Grommet Base - Fits 4.4 to 19.8lbs LCD Computer Monitors

I’m using this HUANUO monitor arm with my Alienware AW3425DW (34 inch ultrawide), and it handles it perfectly. Setup was simple, and the arm feels solid with zero wobble once tightened. The gas spring adjustment took a minute to get right for the monitor’s weight, but once balanced, it moves smoothly and stays exactly where I want it. Cable management is clean, the clamp is secure on my desk, and the overall look is sleek. I was a little unsure if it could support a heavier ultrawide like the AW3425DW, but it’s been completely stable. No sagging, no slipping, just solid performance. If you need a reliable, affordable mount that can hold a large monitor, this one works great.

I was super impressed with the quality of this. I haven't used many monitor arms, so I don't have much to compare it to, but for the price this seems great. It was fairly easy to put together and comes with directions, it has all the tools needed in the box. It's heavy (in a good way), and the gas element was easy to adjust with the included tool. Read the directions, they don't recommend adjusting it until the weight of the monitor is on it for safety. I was okay, but I did start messing with it before attaching the monitor and apparently that's not a good idea. I used the clamp attachment, and it felt very solid. It does require having a desk/table that can accommodate it, but I would recommend it. There is an option for a screw in attachment, but you'd need a hole so it might require some drilling. Once set-up, the monitor had a great range of movement and it felt nice to use. For the price, this feels like a no brainer if you need a monitor arm.

For around $30, this is a solid upgrade over a stock monitor stand and it immediately improves desk space and the look of a setup. If you mainly want a cleaner aesthetic and do not plan on constantly moving your monitor around, it does the job. The downside is that it feels budget when you actually adjust it. When I move the monitor closer or farther, the screen can slightly tilt, which means I have to re-level it afterward. That would not be a big deal, except tilt adjustments are very stiff once you tighten everything enough to keep the monitor from drifting. You basically have to tighten it hard for stability, and then fine tilt adjustments become annoying. A few minor notes: The base has a logo sticker, but it comes off easily. It is not especially sleek compared to more premium arms. My desk is thick (metal frame underneath), and this arm’s clamp range is part of why I bought it in the first place. I bought mine in 2022, so I cannot speak to newer revisions. I still rate it highly because it works if you tighten everything down and treat it like a “set it once” arm. If you want smooth repositioning and easy tilt changes, spend more on a better gas-spring arm.

So I have to make this a bit of a mixed review because there are apparently a couple versions of this out there. The first one I ordered was great. I bought it to try it out and see if it was viable. It helped that the price was great compared to other monitor arms. Once that worked out, I went and bought two more. One of the ones I received was different from the others. The main arm components are the same but the mounting hardware was different. The first two had a single solid screw and three points on the bracket that goes under the desktop mount were metal nobs that fit into three holes to keep the whole thing rigid. For the third one, there was no central solid screw but three smaller ones that fit into those three holes and somehow felt less secure (though it was still solid once screwed into place). At first I didn't think anything of it but then when I mounted the monitor on the arm, I had to adjust the mid-arm tension and the end point to max to hold the monitor in place. The other two were near perfect and didn't require much of any adjustments (and all three monitors are the same exact model/make so no differences in weight/dimensions). So, if you get this and the manual reads HNSS6 then you're going to likely get the good experience. If you get one where the manual (not the box) reads HNSS6/HNSS6W, then your mileage may vary. I honestly thought I was going to have to return the arm because the monitor just wanted to tilt down. As far as the two other arms, putting it together was really straightforward. Once I got the hang of it from the first one, the others took maybe 5 minutes to assemble? And once in use, it's been great. These are not really made for vertical movement once set in place. There's a tension screw you have to use a hex wrench on to adjust height. But horizonal movement along the reach of the arm as well as rotating the monitor left and right is great. Doesn't feel flimsy or unsafe. So much easier to shift my monitors around as I move controllers in place (e.g., flight stick) or if I need to get behind them (one side sort of blocks access to drawers but now that I can rotate the monitor it isn't a problem compared to the static monitor mount I had before.

Solid monitor arm, does as good of a job as expensive arms at more than half the cost and doesn't sag at all. I'm using a HP 24 inch monitor and it works great with this mount. The desk mounting hardware is surprisingly sturdy for how low-tech it is. The VESA mounting plate on the arm also works great with zero noticeable issues thus far. If you're worried about how the mount will cope with a very thin desk (thickness less than 0.59") I recommend getting the support plate for it as it could potentially ruin your desk with heavier monitors. PROS: • Looks good and functionally great • Built in cable routing • Lots of adjustment points • Lightweight but still durable • Easy mounting job, clear instructions CONS: • Not suitable for glass desks and could be risky with honeycomb material desks Overall, this is a really good choice if you use a wooden (or other solid material) desk. Ideal for professional or casual use. 10/10

So far, so good. I did a lot of research. Looking at what type of arm I needed and how each one differs. What my needs were when looking for a sturdy monitor stand. The reviews for this one were very good. Honestly I'm glad I went with this one. It was easy to put together with the implied instructions provided. I attached my monitor to it and have attached it to my standing desk. There will be movement of the monitor, depending on size but only slightly. It stays in place and great for when I'm working. I have my desk space which is what I prefer as I didn't want a big stand taking up room. Get this monitor arm. It is great, feels solid and has so far done the job it was design to do.

This an amazing monitor arm. I am using this for the monitor on the CNC machine I have. I have limited space options but with the design of the arm I can easily position the screen where it can be viewed comfortably. It is a great product and I am very satisfied that it offers so much flexibility making operation simple and easy.

Amazed by the flexibility of this thing. Really can turn at any weird angles which helps my work. I’m able to turn the monitor to face the visitors as well back to an angle where people standing could see. Love the hydraulic sound that comes with it that sounds like robocop. Only downside is I still haven’t figure out how to loosen the adapter holding the monitor. The instruction is to use the Allen key but it doesn’t fit. Need to check online on this

La instalacion es algo tediosa o complicada siendo solo 1 persona pero fuera de eso es muy bueno para monitores de 24-27 pulgadas

Facile à monter et de bonne qualité