MULWARK 20pc 1/4 Ultra Low Profile Mini Ratchet Wrench Close Quarters Screwdriver Set with High Torque - Right Angle EDC Tool with 90 Degree Mini Offset Reversible Drive Handle & Multi Hex Bits Set

I never accept free anything for my reviews. Everything I review is something I bought because I needed or wanted it. I don't trust any review that was in excange for a freebie and neither should you. This just works and works well. Tip:The reversing toggle for the rachet is designed perfectly as it allows you to instantly reverse the direction such as when you just need to loosen and then retighten the fastener. Other rackets means changing hand position which is counter productive in tight spaces. Held properly your thumb and index finger will allow you to change the direction instantly without even looking. I really like the small increments of the racket since it means not having to rotate the racket for the driver bit to fit the fastener and in those hard to reach places often you can only rotate a rachet one or two clicks and with larger increments you might have to remove the rachet and reposition. Learning how to use tools is important and hamfisting this rachet will lead to problems in reversing it unintended. Hold it properly and there is no such problem. Alos, with smaller tools, if you wear gloves use a thinner pair as it makes holding smaller tools mch easier. I found this rachet to be very durable as I can remove embedded screws from wood quite easily where a power rachet would not fit. Without this tool I'd have to disassemble all the railings from a deck just to remove the deck boards for refinishing. This is one of those tools that does exactly what the manufacturer says and with good quality and function.

Nice, well constructed little ratcheting tool for small tight, hard to reach places. Comes with a nice assortment of driver heads. Nice little tool to keep around.

Starting with the bits, the bits included in this low-profile mini ratchet set work just fine. Fitment is good, and the included selection covers most needs. However it is the mini ratchet handle that could have been better. Construction-wise the ratchet works as expected, and seems to be made of good materials that do not feel cheap. The ratcheting mechanism works as intended, and bit fitment is snug. The one big flaw with the ratchet though is the position of the reversing toggle: When using the mini ratchet with one hand, the reversing switch falls exactly underneath your fingertips - which inevitably causes the ratchet to reverse direction when you apply the turning force with your fingers. Unlike regular ratchets where you can grip them with three fingers around the head when using one-handed, with this mini ratchet you'll have to readjust your hand position so that your fingers are not touching the reversing toggle. Aside from that one flaw, the set itself is a good value and nicely made.

This is the older model, so maybe they made the new one better or worse. THIS one works great, and is super low profile. If what you are turning is loose you'll have to allocate extra space for a thumb to add friction to allow the ratchet to ratchet. Note you probably don't need this tool. While it solves a problem it's not a common problem.

For the ladies with smaller hands, this device is a DREAM! My client, a wheelchair user, has been having difficulties with the bolts on the right side wheel. The bolts are between the wheel itself and the chair, meaning there is a tight space. Regular screwdrivers did not work optimally, with a lot of wasted effort and movements. She would report a bolt coming loose, and I would have to flip the chair on its side and HOPE I tightened the correct bolt. NOW she does not even have to get out of the chair! I can locate and tighten it instantly! A couple drops of LocTite and voila! Safety! AND it fits easily into a pocket or purse so I can take it with me. It's a sturdy , compact, USEFUL gadget! And the price? DEFINITELY affordable.

We installed a combination door lock on our front door that takes batteries. After that, we had shutters installed over the glass part of the door snd only realized way after that there was a very small space between the shutter frame and the door lock case. To remove the case to change the battery, you need to unscrew to cover on both sides. Well, we realized we couldn’t use a screw driver due to the tiny space. Thank goodness for this screw driver! It fit perfectly in the tight space and we were able to remove the cover and replace the screw as well. Not sure what we would have done without this tool! If we only use it once a year for this purpose it was well worth the cost. Tool has a good grip, lots of sizes of bits for all kinds of projects. Very easy to use snd comes in a sturdy case.

Decent set with tall and short profile bits that have clear labeling engraved on the bit and stamped on the plastic bit holders. A little more back drag than the Vessel brand, but still workable. My big complaint is the deceptive magnet picture suggesting this has magnetic capability designed in. It does not. It has “magnet-like” bit holder. In other words, it uses a detent ball to hold the bit in the ratchet.

Really convenient for those angular tight spots that screws go into. I am a farmer and several of my tractors have shields and hoods that a regular screwdriver just won’t get to. So you end up bending or misaligning shields and hoods where safety can become an issue but NOT with this handy tight spot screw driver. I appreciate the storage feature that prevents it from being misplaced on the toolbox in pieces. It has all the bits you need for any job and fits easily into many places. At many stores it sells for 3-4x as much, so it really is a great value and provides all the torque I’ll ever need which is usually lacking in cheaper offsets. The grip and hold is excellent! This is one tool that really needs to be in every toolbox. It truly is a no- brainer!

Note that this product does not come any sort of case to keep the bits and the ratchet together. At this price point, that is forgivable. I only needed to use this tool one time - and it worked great. Had to remove the screws holding the bracket that connected a stacked washer dryer. There screws were on the sides, and the closet had only 1 inch clearance on each side ! Mission accomplished.

The hardest thing is the screws on modern cars with the tight spaces just to change a headlight globe, Leaving you very little room even with a short Phillips head screwdriver. So found this it is cheap but sturdy to get the job done, just removed the staple and use the original package to keep the bits together just sliding out the cardboard backing when needed.

Goeie tool

Bra låg profil och bra kvalite och stumhet i den trots det lilla formatet.

Excelente producto, buena calidad, no podía colocar un tornillo difícil y esta herramienta me ayudo, es excelente, muy recomendable