Lifegard Aquatics1/2-Inch Standard Threaded Bulkhead

Works well!!

Great price, easy to install, a stepped drill bit is a good idea. Used these along with pig watering nipples to build a waterer for our pigs and it’s worked great! A lot of people complained about these cracking or not sealing it’s simply not true, the trick is go easy, don’t over tighten them! I went hand tight plus a quarter turn, then filled the barrel and checked for leaks, not one drop. So far they have been in temps down to the low 20s and the water has frozen near solid once. So far not one leak

I used this bulkhead fitting and a nipple waterer for my pigs. Works great - heavy duty and no leaks. I highly recommend this product.

I bought 6 of these for a hydroponic system. Others have complained that they leak. I found that by installing the washer on the inside that the only leaking was coming from the screw threads. By using quite a bit of teflon tape on the screw threads I was able to tighten it up and don't have any issues. I wish they came with two washers, which is why I give it 4 stars and not 5; however, with a plumbers wrench and some teflon tape they work.

I recently bought a small Wet/Dry vac that is designed to mount to a wall, for cleaning up melt water from the snow our car brings into the garage . Removing it from the wall, all its tools, and tool rack, etc. to empty the tank when is inconvenient, as it won't hold enough water to do the whole job in one pass. Unlike larger Wetvacs, this one has no drain port. You have to remove the top to dump the tank. So I added this fitting, an adapter to garden hose thread, and a garden hose valve to the side of the Wetvac tank at the bottom. I can easily drain it into a bucket how ever many times are needed, and only have to remove the Wetvac from the wall once at the end of the job, for air drying the inside. The fitting is well made and does not leak.

We used two of these on the pig waterer we made out of a 55 gallon drum. Previously we had inserted the water nipple directly into the wall of the plastic drum, but had to reinforce with silicone so it wouldn't leak. Adding these makes the nipple more durable and...no leaks!!!

Works great for my motor oil tub. I used a 5 gallon bucket and a valve along with this threaded bulkhead. Now I can easily drain the oil from this bucket for recycling.

Over tighten mine then broke the nut clamping down with vice grips. Both my fault. go metal instead

Lo instale y es perfecto.

A bit big for my use, but it is well built

Muy buena calidad, para el precio 👌 muy recomendable

Worked very well, I used this to add a faucet to a bucket. Buy 2 or an extra washer, if you’re not using it for an aquarium you’ll need the second washer.

Quality product good price would buy again