REXBETI Ultimate-750 Paint Sprayer, High Power HVLP Home Electric Spray Gun, Lightweight, Easy Spraying and Cleaning, 5-pcs Paint Strainers, 4 Nozzles(1 Nozzle has Already Been Installed on The Gun)

Update 11/2019 - this sprayer was used a lot more this year than was intended. one small job turned into one very large project. while i had some issues with the instructions really there wasn't much to complain about with this. after having finished with a weeks long project i can honestly say for the money this thing is a real value. the worst limitation for me was the size of the tank. i ended up getting a second so i could have one filled and ready to swap out when the one would run dry. that alone helped speed things up the job a good bit. so after a lot of use i decided to change my rating from 4 to 5 stars even with the sad instructions.Thankfully I have not had the need for a sprayer in over twenty years until recently. That last sprayer I used was big bulky and after I was done I hated it so much I threw it away. I had hopes that after 20+ years paint sprayer in general would be better than what I’d used, and this one is.The Good –1 – Light weight2 – Ease of use3 – Easy to clean4 - Multiple tips and three spray patterns fit most every spotThe Bad –1 – The page says can be used with latex paint, the instructions do NOT2 – The manual/instructions that come with lack important details3 – The paint receptacle is on the small sideThe sprayer comes with all you need to get started other than paint, thinner, a paint strainer/filter, extension cord, and over-sized paint bucket to mix. It has three different tips that appear identical other than one having different diameters. The website says what they are for but not in the manual? I may rant on instructions and manuals but they matter a lot and not just with this product. Something so integral to a purchased item, something that cost cents to produce? But all too often neglected.I like this product but it is frustrating to once more get a manual that is so poorly written in this case it doesn’t mention details on paint? Really it is primarily a paint sprayer? Yet the manual’s focus is on other thinner materials like stains. Example on the website it says, “great for spraying latex paint,chalk type paint and milk type paint.” Well the manual list everything else not a word about dilution for latex paint any paint? It has a chart for dilution everything under the sun literally speaking but paint?It also does NOT say a word about what thinner type to use with latex paint? There are many types of paint thinners. Paint is expensive mistakes are costly, better safe than sorry. So I checked locally and found I should use a mineral oil based solvent thinner. I used 1-1.5 cups of thinner to however much paint is held by two of the reservoirs. Mixed thoroughly 4-5 minutes.As to use, it did have mostly good coverage partly due to it being so light weight. The sprayer paint receptacle unscrews easily. I found out the hard way that I had to stay at least a couple inches away from my masking line as it would spit random bits of paint from the get go over the masking line. I tried both vertical and horizontal patterns and made no difference with that issue. I ended up leaving a two inch gap around everything I’d masked and had to touch up by hand.The sprayed areas did show a very good consistent results. I am happy with the overall paint application. My impression was positively impacted by the fact that I had ordered a second kit that included a spare paint receptacle. For the money I can’t complain much though. Yes the instructions are bad, missing a lot of important information some as mentioned. But all said the sprayer works well for the most part. It isn’t perfect but it is worlds away better than what I had used previously. You can pay a lot more and get a better sprayer but in my case this unit fit my needs best and as said was affordable compared to others.I cannot say how this sprayer works with anything other than latex paint. Based on my results for most small to medium jobs I would recommend this. Jobs that are bigger mostly due to the smaller size of the paint reservoir, at a minimum you really need spare tanks to hold more paint. That is its weakest point and why maybe not the best for large jobs but to each their own.

I bought this to stain my red cedar fence - about 150 linear feet x 2 sides. After finishing side 1 I feel I have to share my experiences with this sprayer. I recently threw away my old sprayer - it was a "W" brand. It used to sound like a jackhammer. I tried to use it for a third time and the pump was seized. This Rexbeti sounds more like a vacuum cleaner or a blow dryer. I used the gray tip, (3.0mm I think) because I wanted lots of stain to flow and was concerned about clogging. I had lots of clogs with the "W" brand. This thing did not clog once during the entire afternoon. Obviously you can't let it sit dirty for an hour or the stain/paint will dry in the sprayer but no problem stopping for 10 minutes. I did not experience any splattering of the stain but I have done this a couple of times before. You need to start the sprayer off of the fence either above the top or into the grass below. Then sweep the sprayer across the wood and keep it moving. The output was a fine mist. Winds were like 10-15 mph which is really too windy for spraying but I just held the sprayer closer to the fence, about 8 inches. I really had to keep it moving to avoid getting runs. Clean up was easier than the W brand as well. There is no piston pump to clean. I rinsed the cup with mineral spirits a wiped it out with a rag. Then I put some fresh mineral spirits in and sprayed it into a 5 gallon pail. Then the nozzle was easily unscrewed and I just wiped it down. No doubt, it is not fun to clean but I'd say it took me 15 minutes, start to finish. Here's a couple of tips when staining a large fence.1. Test the sprayer using water. This will give you a feel for the consistency of the spray and the spray pattern you want to use. Also, good to know it is not defective before loading it up with stain.2. Buy one of those mixing paddles that you put on your drill so you can mix your stain very thoroughly. This really makes a difference in avoiding any clumps in the product.3. If you are using those 5 gallon pails of stain, after mixing, pour a gallon into an empty plastic jug with a handle. Something like a windshield washer bottle. Now leave the big pail in the driveway and bring the gallon jug with you as work on the fence. You will need to refill the sprayer many many times and it will be much easier with the jug. Then you only need to go back to the driveway after 4 or 5 refills. Also bring a little table around with you so you have a place to lay the sprayer down while you refill.4. Buy more stain than you think you will need. Home Depot and Lowes will take back any unopened leftovers and you really don't want to have to run to the store during the middle of the job. You will need to clean the sprayer if you stop using it for more than 15 minutes at a time.5. Wear a baseball hat and some type of eye protection because the mist does kind of waft around a little.6. Make sure your extension cord can reach the part of the fence farthest from the outlet. see tip 4!All in all, a successful first half to my project. I am even more confident the second side will go even better. I am totally satisfied with this sprayer, especially at this price. I couldn't ask for anything more.