FIAMM72012 Low Note Replacement Horn

Horns on my Camry just quit. Diagnosed the problem down to the actual factory horns had gone out (both!!!). Ordered this horn and the Fiamm high note that is similar to this one. Installation could not be simpler. My system has just the power wire to activate the horn and grounds though the mount. On these horns you have a ground terminal. They come with a supplied wire that pushes on the ground terminal and you simply place the already mounted ring terminal onto the mounting bolt for the bracket to the car.You do have to slip the factory plug off at the horn and install the terminal provided, but easy enough. Then push on the connection, mount the bracket and done. Easy, easy, with basic tools.You will need a wire crimper/snip to do the wire connection, but basic stuff.Sounds great and louder/clearer than the factory ones even when the factory ones were new!If you need a replacement low note horn then don't hesitate! Works well.

I installed it within twenty minutes of receiving it. No more "road runner" horn. This will get other drivers attention.

I couldn't stand the little high-pitched roadrunner 'Meep-Meep' horn on my Kawasaki Mule. I wanted something with a lower tone and louder. This FIAMM 720212 horn checks both of those boxes perfectly. Nice and loud and low tone. It would even be a good replacement horn on any automobile. Simple installation and well built.

Just got the Low note and high note horn today, about two months ago, my car horn started to go off on itself and the same night, it just went off and horned for who knows how long until I heard it. So my husband pushed hard on the wheel tried to turn it off, it went off and after that I lost my horn...So it's been two months and we finally got time to look at it. Tested the wire, shows there's power when we push on the button, so we tested the horns, Yup, They are bad. Ordered this on Amazon last Friday and got them today. Tested and all works fine! LOUD! I've also attached the pics of how the connectors look like so you could see if you need extra work to re-do the wire...We did. The one on the left i think it's the High note and the one on the right is the low note one. Hope they last! Will update

I bought this for my Yamaha R6s to replace the weak horn it came stock with. the stock horn was not even loud enough to hear over the motor of the bike.this horn arrived fast, i got it in about 4 days. When i went to install the horn it did not fit quite like the stock one but given the stock one was about 2inches across i was surprised that i was able to make this one work in the factory spot. Installation was simple just unplugged the factory horn and plugged this new one in, attached the bracket from the factory horn since the bracket that came with this horn would not work in the limited space i had on my bike, reattached it to the bike back in the factory spot and i was done so i thought. I tried to turn the bars lock to lock and well with the sport bike fairings it was unable to turn left then back to the right. since the horn was bigger it was hitting the fairings, That was and easy 2 second fix i just reached down and tweaked the horn bending the bracket so it did not hit or rub anything.The horn is nice and loud sounds like a truck horn and will be heard by everyone around me and will get their attention.For the price i would recommend this to anyone and everyone to replace their factory horn.

My boat horn went out somehow. This was a perfect fit and only took 5 minutes to install

Researching this horn gave me higher hopes, yet in reality it’s mostly a dud. Barely louder than my stock meep-meep horn. The terminals on the one I received are in a bad position, where I had to bend the terminals downward and rotate the horn on install to point at the inter cooler intake just to make things work. Disappointing.

Not perfect match for restoration but worked well as a replacement horn.

Conforme con la bocina

I bought this after installing a Denali Mini Soundbomb which was twice as expensive, and ended up being defective, as it kept blowing my horn fuse without making a single sound. Yes, I had installed the Denali correctly, the wires were fine, and the horn's electrical specs matched my motorcycle output. I sent it back (it took a lot of emails back and forth, but overall Denali was courteous and helpful), bought the Fiamm Freeway Blaster horn which cost half as much, and has the same form factor and electrical requirements. Took five minutes to install - and worked fine the first time around. Perfect solution to replace the silly 'meep meep' horn on my motorcycle (which car drivers don't hear) with a loud 'hoooonk' (like a mid-sized sedan). Very happy, and now riding safer, too!

It has a loud trumpet type of sound. I like the nostalgic sound.

Excelente producto.

Got this to replace the horn on my 2007 Mazda 3 and works exactly like original. Same sound, same everything. Cheap replacement. Perfect!