Features:Purpose: Making road foot stone and how to use this concrete paver mold to establish a path:The first step:According to the package instructions, mix with water. The concrete will be thick enough to keep the edge of the oatmeal when it is ready to use.The second step:Fill the paver mold, scoop up the concrete with the shovel and ensure that each area is filled.The third step:Use rubber gloves to fill concrete around the mold and fill any gap or low point. Tap the mold with your hands to eliminate any bubbles.The fourth step:According to the outline of the mold, smooth the concrete and wipe out the excess parts.The fifth step:Allow the concrete to be set for up to five minutes, then carefully remove the mold. For the next stretch, rotate the mold by a quarter and place it next to the newly completed paver. If you are creating a bending path, tilt slightly.The sixth step:After curing the concrete overnight, fill the cracks with dirt and wash out the excess parts. Wet surface around the newly formed pavers to help them precipitate.Description:The mold is made of ABS plastic thickness of 2mm. It can be used for casting plaster and concrete.With one mold can produce one curb stone fence stepping stone for arranging garden paths.Depending on the geometry of the product wall thickness can form less than the above dimensions. Specifications:Material: ABSColor: blackSize: 45x26x5cmPackage size: 47x8x28cmPackage included:1 x 2pcs mold Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.
Trustpilot
3 days ago
2 weeks ago
