GP-Extreme Thermal Pad 80 x 40 x 1.5 mm Excellent Heat Conduction, Ideal Gap Filler Easy Installation Thermal Conductivity 12W

I got these 1.5mm pads to re-pad a FE 3080 Ti. Hopefully this review shows up on all pad thicknesses as I originally purchased 2mm pads based online guides and videos. I got my card March 26 2022, it seems the heatsink has changed, see another review with the same hypothesis. The core was not making much contact to the heatsink with 2mm pads, memory temps were amazing but the core was thermal throttling at the desktop. I had used a manual spread method for the paste and only the very center about a dime size had made any contact. I ordered the 1.5mm pads and now I have memory temps about 15-20c cooler and the core peaks at 70c under full load. I used 3mm pads on the back but 2mm might work as I can see a bit of bulge on the backplate, I used a 1mm pad on the NVDD on the back as it seemed the stock super thin pad wasn’t making much contact after adding the 3mm pads. I had some trouble with a couple of the pads not wanting to stick, however most held in place, it seemed to be related to the material it was on, RAM and PCB had no issues, the NVDD didn’t stick very well, it was just a minor inconvenience though. I wish these pads were a bit cheaper especially considering I wasted money and time with the 2mm pads. At least they are cheaper than fujipoly pads

really worked bring down my nvme M.2 from 60 degree Celsius to 57 degree

I had to replace the thermal pads in my GeForce RTX 3080Ti GPU. These pads have excellent cooling capacity. The quality and adhesive quality are superb. The pads are easy to cut. After putting the pads in place on my GPU, I installed the GPU into my computer and noticed the temperature go down from what it had been before. When playing intensive video games, the range I am seeing is between ~82 - 83 degrees Celsius which is withing tolerance specs for a 3080TI graphics card.

My original intention to use this product with my NVME drive with my Mini PC. My Mini-PC does not have a secondary fan to cool, so the mfr leverage using thick thermal pads and use the metal bottom plate to act as a heatsink. Since thermal pad is about 4mm thick (I thought it was 3mm), I had to buy both 3mm and 1mm pads (I wished I bought 2 2mm pads) and sandwich them between the NVME and the bottom plate. After testing with CrystalDiskMark 8 with 32Gib test, I was able to reduce my max temps by 13 degrees. Previously, my Gold P31 was having max temp of 77c. After using this, it cooled to 64c degrees (nvme operating temp up to 70c). Only time will tell if this product can be used long term. I will update if the pads got worse over time. Cons: Product is very malleable. My last experience with a different mfr thermal paste was akin to rubber pad. Make sure to have a cutting board and xacto knife to work with. This is not a product to use with your hands/fingers. It also compresses easily, so do not let the product get smashed. It's like it's made 1 step just before becoming putty itself.

It worked good and lowered temps

My Dell gaming laptop seemed incapable of dealing with the the heat generated while gaming so I figured I would get this to replace the pads it came with. Turns out the manufacturer left on the plastic film over the original thermal pads preventing it from having solid contact between the chips and the heat sink. I still replaced them all with the gelid and it has been working great since. It was a bit fiddly cutting the pad and getting them in place, but with a little patience it went without a hitch. I would suggest ordering one more pad than you think you'll need.

Used it for a bit of a weird use case, but I used the 1mm thermal pad as a TIM between two motherboard heatsinks and their AMD chipsets since their temps sucked. Managed to drop temps from 74C down to 55C on an ITX board, and 67C to 52C on an mATX board. Costs a few bucks, but highly recommended. Wasn't hard to apply, just try to use scissors and tweezers and remove one adhesive side at a time.

My 3080 Vision OC 12G was getting pretty hot during gaming sessions and after trying several non-invasive solutions with no luck I decided I would try replacing thermal pads and paste. I splurged on high quality replacements, but it was totally worth it! After replacement these are my results during furmark stress tests: VRAM temp - 100 to 80 Hotspot temp - 97 to 78 GPU temp - 82 to 70 For anyone with the same card, these are the pad thicknesses I used (along with Kingpin KPx paste): 2mm for VRAM 2.5mm behind VRAM (against backplate) 1mm for everything else

Mehrere Pads wurden für die Front-/Backplate einer 3090 FE verwendet. Aufgrund der weichen Mischung wird der sonst empfindliche Anpressdruck der Kühler auf die GPU DIE nicht beeinflusst. Die GELID Pads werden aus diesem Grund empfohlen. Die maximal zu erwartende Wärmeübertragung wurde erreicht, die Temperaturen sind seit 4 Wochen konstant und die DIE Temperatur sowie Hotspot Delta sind ebenfalls konstant geblieben und gerade letzteres ist oft das KO Kriterium für andere Pads. Einige Reste habe ich für die Außenseite der GPU Backplate verwendet und ich war überrascht wie gut die Pads an der Backplate und an den nur draufgelegten Kühlern haftet - ohne dabei Spuren zu hinterlassen. Durch die hohe Nachfrage hat sich der Preis natürlich geändert, das ist natürlich unglücklich, aber kaum zu ändern.

Nice

Replaced thermal pads on a RTX 3090 and this significantly reduced the temps I was having

Pad termici utili in schede elettroniche, Buon prodotto

This is a very bad thermalpad, very far from the 12 that it states it conducts. To be honest, just get something else, the performance SUCKS, i deeply regret it.