anidees AI Crystal Cube V2 Dual Chamber Tempered Glass EATX/ATX PC Gaming Case Lite Version - Black AI-CL-Cube-Lite2

This case is beautiful. It makes you want to make custom liquid cooling loops.I went from a plain white dishwasher case to this one, and it is so different having a case with this high quality. Pretty easy to build in, but I do have a few issues with it's design.1. SSD mounting. Might just be my PSU, but it came with all 90 degree sata power connectors. I ended up putting it on the outside of the drive cage because that's the only place that wouldn't bend my SSD's connectors.2. PSU air intake. It is really not getting good airflow either way. You can mount it so that it's either taking air from against the glass, or from against the dividing wall for the two chambers. It gets basically no airflow. While playing intense games, it gets uncomfortably hot to the touch.What I really like about this case:1. There is SO much room to build in. You can fit so much in this case. I have a 12.5" graphics card, and the 212 evo cpu heatsink and they fit with extra room to spare.2. Extremely dark glass. I have 6 plain white LED fans in my case, and it looks amazing both in the dark and when the room is fully lit. Very sleek.3. Build Quality. This thing is heavy duty. It's also heavy, but you probably shouldn't be carrying around a glass case anyways.4. Modern features. 2 usb 3.0 ports. Fan Speed control. Dust filters everywhere. Something that should have probably been here at this price point is a front USB C port, though.This case is eventually going to house my Ryzen build when I get the components, and I can't wait to build in it again. I can happily reccomend this case to someone wanting a tempered glass case, but doesn't want something as visually loud as other TG cases.

This is a great case. Fans are quiet. Small footprint on the desk and it doesn't loom over you like a tower. Compact, but everything fits. Surprisingly good clearance while installing. (EATX motherboard with full size GPU).I was initially worried by some reports of the front fan/bracket solution being tight inside the front panel but I had no problems with heat. Possibly because the whole top surface is vented - a pretty large area, there are vents in the back for both sides/"chambers" (smaller one on the PSU side), there is a vent in the case bottom directly under where my GPU is installed (low) so there's actually somewhere for GPU exhaust to escape instead of just recirculating and heating up the interior. There are extra bits of venting area all around and it somehow all works out to good temps and low noise. (This is with an air cooler. Probably could do better with an All-in-one).PSU placement leaves plenty of space in front of it to plug and unplug cables. I added a harddrive recently and just plugged it in without having to dig around or remove PSU. Very easy access.Parts, glass, and plastic on the front panel are good, solid quality. Paint is nice - powder coated style.Would buy again.

Great case with TONS of room to be creative. Really awesome lighting in the fans allows you to get creative with all the new RGB effects that are coming in GPUS, motherboards & Cooling units. The opportunities to add fans are basically endless, allowing for a very low temp build for whatever specs you might be running (My specs below). I will say my 1080 I have only allows for an inch or two of clearance. So if GPU's get any bigger in the coming years, you may have an issue there (Fitting it diagonally is also an option for Titan cards etc).I do have to add that the fan hub controller I received initially, did not work at all. It has a custom pin connector that does not go directly into the motherboard, so I was left improvising until a replacement arrived. The customer service team with Anidees QUICKLY took care of the issue with me, sending me a whole new set of fans AND the connector ASAP to correct the problem. Outside of that, I had no issues with the case at all. The glass came flawless, and looks fantastic with the lighting behind it. Metal framing is structurally sound, and setup in a way that allows for great cable management. This case really added the bit of classiness to my build that I was looking for. Can't recommend this case enough.ASUS ROG x299 Motherboard w/ i7 7800XASUS ROG STRIX 1080Corsair H105 Water Cooler

The main thing that attracted me to this case was the front of it. Using four fans in the front or two 120mm fans and 3 90mm fans looks great. There's so much room in this case to add whatever you want to it. I has plenty of room to add a custom a loop if that's what you're looking for. There is a lot of space for radiators but I wouldn't recommend putting one behind the intake fans at the front of the case. The only downside to this case is that there isn't a vertical bracket for a graphics card but it's not that big of a deal if you're willing to use a dremel. I think that there is a lot of flexibility in this case to use it however you want and look great doing it. An ITX board looks a little silly in it but if you want to put it in there, then you do you. The one downside to this case is that if you want to fill it out and make it look good, you're going to have to spend the money on a good number of fans and fan controllers to control them all.

best case ever had, easy to work on, anidees staff very helpful with my questions.since i bought this and showed to my friends they now have bought one. 5star

fantastic case cooling needs done right though

Brillant case design, No issues with putting old build into new case, Room for a Radeon 295x2 GPU. Only downside would be the overall weight due to the tempered glass though it looks fantastic when build is completed.

This is a beautiful case. I keep the LEDs set to static white most of the time, because I (and my wife) think it just looks the most classy. I've only built a handful of PCs over the years, but I did not find this especially difficult, maybe just a bit fiddly. Airflow is hindered a bit by keeping the front glass panel attached, but all but the most power-hungry gamers seeking the last drop of overclock from their systems won't find this a problem.NOTE: I bought this case on Amazon Marketplace from Kalfsen B.V. with 4 Aureola fans included. After about a month one of the fans malfunctioned (it wouldn't sync up coulours with the others). I contacted the seller and sent them a picture of the problem and within a couple of days they sent me a pack of 3 replacement fans with a spare control box and remote. I'm docking the case 1 star for being a bit expensive and slightly fiddly to build in, but the seller gets 10 out of 10 for service, I would definately buy from them again.

Felt compelled to write a review for this product. After much deliberation I purchased this cube case and honestly haven't regretted it one slightest bit. I'm thinking if I write too much of a good review, the product I bought is no longer unique and others will have it. Honestly, I think this is one of the coolest PC designs I've laid my eyes on and I've seen a fair few in my time.The build quality is just fantastic. Made of tempered glass and very robust in handling and appearance. The smokey glass gives a premium feeling and night or day, releases a vision of ...cool.There's separate compartments for motherboard and the rest like the HDD and other wiring from PSU into another compartment. I'd recommend to get the RGB version of this cube or if not, fit your own LED system because at night just blows you away. If you're not the type to LED it up and like the 'discreet' factor, then this cube also fits that purpose.If you have a gaming rig and are worried about cooling then fear not. This cube can fit up to 8-10 fans if needed.If you're deliberating whether to buy or not or whether there's a competitor out there that can do better for looks and practicality then I'd say look no more. Buy, buy buy the Anidees Crystal Cube and never worry again to replace the case.Peace out!